• Manufacturing Solutions Overview
• Forging
  • DEFORM User's Guide
    • DEFORM Utility Menu
      • Setting Up a Forging Simulation
      • Rigid Tool Surface Meshing Dialog
      • Materials Flow Stress Data Dialog
      • Symmetry Plane Dialog
      • Tool Motion Dialog
    • Modifying Model Geometry
    • Applying Materials to the Parts
    • Meshing the Model
    • Defining Contact Interactions
    • Creating a Symmetry Plane
    • Defining the Tool Motion
    • Creating a Solver Input Deck (.key file)
    • Control Cards
    • Supported Keywords
    • Terminology
  • HX-Forge User's Guide
    • Solution Methodology
    • Launching the HX-Forge User Profile
    • Uses of the HX-Forge User Profile
    • HX-Forge Utility Menu
    • Forging Wizard Panel
      • Model Data
      • Process Data
      • Model Setup
      • Export/Solve
    • Launching the HX-Forge Solver
      • HX-Forge Output Files
      • Convergence Criteria
    • Workpiece Material Models
      • Sine Hyperbolic Inverse Model
      • Metal Forming Power Law
      • Norton-Hoff Model
    • Boundary Conditions
    • Microstructure Predictions
• HyperWeld
  • User's Guide
    • Loading Friction Stir Welding
    • Friction Stir Welding Utility Menu
      • Select Units
    • Creating Mesh for Joints
    • Material Data
    • Creating and Assigning Boundary Conditions
    • Defining Process Parameters
    • Using Extract Points
    • Export/Launch the HyperXtrude Solver
• HyperXtrude
  • User's Guide
    • Components of HyperXtrude
    • Solution Methodology
    • Features and Capabilities
    • HyperXtrude User Profile
      • Key New Features
      • Launching the User Profile
      • Uses of the HyperXtrude User Profile
      • HyperXtrude Utility Menu
      • Importing HyperXtrude Data Decks
      • Project Browser
        • Project Browser Context Menus
        • Run Panel of the Selected Project
        • Wizard Panel
      • Extrusion Wizard
        • Select Model Units
        • Set Analysis Requirements
        • Select Press Data
        • Select and Assign Material
        • Generate Workpiece Mesh (Starting with Solids)
        • Improve Mesh
        • Set Component Information (Starting with Existing Mesh)
        • Generate Workpiece Mesh (Starting with Solids Using Automatic Mesh Size Estimation)
        • Generate Tool Mesh (Starting with Solids)
        • Generate Tool Mesh (Starting with Solids and Using Auto Mesh Size Estimation)
        • Generate Workpiece BCs (Set Process Conditions)
        • Generate Tool BCs
        • Create Bearing
        • Save and Export the Model
        • Generate Report
        • Tube Extrusion Wizard
          • Process Steps to Create a Tube Model with Concial Die
        • Tool Deflection Analysis
          • Process Steps in Tool Deflection Analysis
        • HX Job Manager
          • HX Job Manager Configuration Settings
            • Advanced Options
      • Material Database
        • Flow Stress/Viscosity Graph
        • Fitting Material Data
      • Press Database
      • Boundary Conditions
      • Create Bearing Lines
      • Extract Points
      • Model Summary
      • Defining Process Parameters
      • Defining Bearing Profiles
        • Bearing Optimization
        • Export/Import Bearing Control Points
        • Export Bearing Optimization Points
      • Billet Skin Tracking
        • Set Billet Data
      • Optimization
      • Exporting HyperXtrude Data Files
      • Create Billet
      • Quick Solid Edit
    • Polymer Processing User Profile
      • Plate Meshing Wizard
        • Select Model Units
        • Select Material Data
        • Set Analysis Requirements
        • Generate Polymer Mesh Starting from Solids
        • Generate Polymer BCs
        • Save and Export the Model
      • Coextrusion Analysis Wizard
        • Select Model Units
        • Select Material Data
        • Set Analysis Requirements
        • Generate Polymer Mesh (Starting with Solids)
        • Generate Polymer Boundary Conditions
        • Generate Insert Mesh
        • Generate Insert BCs
        • Generate Tool Mesh
        • Generate Tool BCs
        • Export the Model
      • Tire Extrusion Wizard
        • Project Information
        • Units
        • Materials
        • Extruder Selection
        • Inlet Sections
        • Contour Specs
        • Die Import
        • Process Conditions
        • Solver Parameters
        • Mesh and Create BCs
        • Export
      • Runner Balancing Analysis
        • Select Model Units
        • Select Material Data
        • Select Components
        • Set Process Conditions
        • Create Runner Mesh
        • Create Boundary Conditions
        • Export the Model
      • Melt Flow Analysis Wizard
        • Select Model Units
        • Select Material Data
        • Set Analysis Requirements
        • Generate Polymer Mesh (Starting with Solids)
        • Generate Polymer Boundary Conditions
        • Generate Insert Mesh
        • Generate Insert BCs
        • Start From Existing Mesh
        • Create Symmetry BCs
        • Improve Mesh
      • Layered Tetra Mesh
    • Metal Rolling User Profile
      • Launching the User Profile
      • Utility Menu
      • Importing HyperXtrude Data Decks
      • Material Database
        • Flow Stress/Viscosity Graph
        • Fitting Material Data
      • Boundary Conditions
      • Defining Process Parameters
      • Extract Points
      • Model Summary
      • Exporting Data Files
    • Material Models
      • Assign Material Properties
      • Fluid Material Properties
      • Workpiece Material Properties
        • Sine Hyperbolic Inverse Model
        • Metal Forming Power Law
        • Norton-Hoff Model
        • Hensel Spittel Model
      • Polymer Material Properties
        • Power Law Model
        • Spriggs Power Law Model
        • Carreau Yasuda Model
        • Cross Model
        • Modified Cross Model
        • Herschel Bulkley Model
        • Criminale-Eriksen-Filbey Viscoelastic Model
        • Temperature Dependence
      • Solid Material Properties
      • Tool Material Properties
    • Boundary Conditions
      • Inflow Boundary
      • Outflow Boundary
      • Solid Wall Boundary
      • Solid Fluid Interface
      • Fluid Fluid Interface
      • Bearing Surface
      • Symmetry Surface
      • Free Surface
      • Tool Surface
      • Assign Boundary Conditions
      • Interior Surface
      • Friction Models
    • Process Parameters
      • Session Tab
      • Process Tab
      • Advanced Tab
    • Guidelines for Simulation
      • Checklist for Metal Extrusion Simulation
      • Guidelines for Non-Hex Meshes
      • Other Meshing Guidelines
      • Data Required for HyperXtrude Runs
      • Guidelines for Mismatched Mesh
      • Guidelines for Boundary Conditions
      • Convergence Criteria
      • Moving Boundary Analysis
      • Profile Deflection Analysis
      • Running Jobs in Parallel
    • Frequently Asked Questions
    • Launching and Managing HyperXtrude Jobs
      • Launching a Job Using the HyperXtrude Interface
      • Launching a Job Using a Command Prompt
      • Key Rules for Launching HX Jobs
    • Introduction to the HX Solver
      • The Main Menu
      • Session
        • New
        • Load
        • Save
        • Save As
        • Command
        • Exit
      • Editors
        • The Mesh Editor
        • Set Editor
        • Bounding Box
      • Properties
        • Material Properties
        • Process Parameters
      • Solver
        • Algorithm Parameters
        • Linear Equation Solver
        • Relaxation Factors
        • Initial Guess
        • Mesh Update
      • Adaptation
        • Error Estimation Parameters
        • Adaptation Parameters
        • Mesh Conditioning
      • Stats
        • Model Stats
        • Solution Stats
      • Solve
      • Estimate
      • Adapt
      • View
      • Introduction to the HyperXtrude Post-processor
        • Main Viewport
          • Viewport Control Panel
          • View Form
          • Graphics Options
          • Color Editor
          • Set Selection
          • Load Results
          • Slice Editor
          • XY Plot Option
          • Isosurface Editor
          • Velocity Vectors
          • BC/Load Plot
          • Deformed Shape
          • Bearing Profile
          • Particle Tracer
          • Solution Probe
          • Hardcopy
          • Reset
          • Dismiss
      • Tcl Functions
  • Recommended Computer Hardware Specifications
  • License Setup
  • HyperXtrude Files
    • HyperXtrude Output Files
    • Typographical Conventions
    • The Gridfile (*.grf)
      • Geometry Information
      • Node Information
      • Element Information
      • Defining Functions
      • Solution Extract Function
    • The Command File (*.tcl)
      • Commands
        • Adapt
        • Enrich
        • Estimate
        • Exit
        • Interactive
        • Load
        • Pset
        • Refine
        • Save
        • Set Deformation Type
        • Set Variable Time Step
        • Solve
        • Source
• HyperForm
  • User's Guide
    • Platform and Operating System
    • Graphical User Interface Features
    • File Types
    • Importing Files
      • Importing HyperForm Model Files
      • Importing an FE Model File
        • Import Error Messages
        • Solver Options
          • By HM Comment
      • Importing Geometry
    • Exporting Files
      • Exporting Geometry
      • Exporting an FE Model File
      • HyperMesh Comments
        • HM_ASSEM
        • HM_COMP_BY_PROP
        • HMASSOC
        • HMASSEM
        • HMASSEM_COMP_ID
        • HMASSEM_ID
        • HMBEAMSEC
        • HMBEGINDOC
        • HMCOMP
        • HMCONT
        • HMCURVE
        • HMDB
        • HMDISPLAY
        • HMDPRP
        • HMENDDOC
        • HMENT
        • HMERROR
        • HMFIXEDSURFPOINT
        • HMFLAG
        • HMFOOTERBEGIN
        • HMFOOTEREND
        • HMGPMV
        • HMMOVE
        • HMNAME
        • HMNAME ASSEM
        • HMNAME COMP
        • HMNAME GROUP
        • HMNAME MAT
        • HMNAME PROP
        • HMNAME SET
        • HMORIENT
        • HMOUTPUT
        • HMPLOTELM
        • HMREFSYSTEM
        • HMSET
        • HMSET_SET_ID
        • HMSETTYPE
        • HMSUPPORT
        • HMTAG
        • HMUNSUPPORTED
        • HWCOLOR
    • Settings and Configuration Files
    • Unit Selection
    • Material Variables
    • Optimization Studies
    • Output Results
    • HyperForm Settings
      • LS-DYNA Incremental
      • RADIOSS One Step
      • Die Module
      • RADIOSS Incremental
    • Graphical User Interface
      • Menu Bar
      • Toolbars
        • Standard Toolbar
        • Collectors Toolbar
        • Visualization Toolbar
          • Element and Ply Visualization
          • Element Quality Review
            • Element Quality Review Context Menus
            • Element Quality Review Configuration Dialog
        • Display Toolbar
        • Standard Views Toolbar
        • View Controls Toolbar
        • Image Capture Toolbar
        • Checks Toolbar
        • HF Auto Process Toolbar
        • Die Module Toolbar
        • RADIOSS One Step Toolbar
      • Tab Area
      • Graphics Area
      • Panels
        • Subpanels
        • Secondary Menu
      • Status Bar
      • Display Controls
        • Setting Basic Views
        • Using View Rotation
        • Changing the Window
        • Performing View Translation
        • Return to the Previous View
        • Setting View Options
        • Setting Tolerances
      • Input Controls
        • Mouse
          • Rapid Menu
        • Keyboard
          • Mapping Keyboard Shortcuts
          • Shortcut Mapping Examples
        • Input Collectors
          • Picking Nodes on Geometry or Elements
          • Picking Entities on the Screen
          • Entity Selection
          • Component Display
          • User Features of the Graphics Engine
          • Advanced Menu Selection
        • Menu Buttons
        • Pull-down Selections
        • Pop-ups
        • Toggles
        • Plane and Vector Selector
        • Input Fields
        • Color Pallette
    • View Functions
      • Command Window
      • Model Browser
        • Basic Browser Operations
          • Sorting Entities
          • Filtering Entities
          • Finding Entities
        • Model Browser Views
          • Model Browser Optimization View
          • Model Browser Include View
          • Direct/Indirect Property Assignment
          • Direct/Indirect Property View
        • Display Controls & Browser Modes
          • Global Display Tools
          • Local Display Controls
          • Action Mode Tools
        • Context-Sensitive Menu
          • Organize Include Dialog
          • Move To Include Dialog
        • Configuring the Model Browser
      • User Process
        • Multistage Setup
        • Optimization Setup
      • Die Process
    • Tools
      • Autoposition
      • Auto Process (RADIOSS Incremental)
        • Details Tab
      • Auto Process (LS-DYNA Incremental)
        • Details tab
      • Autotipping
      • Bend
      • Blank Fit
      • Blank Nesting
        • Using Blank Nesting
      • Blank Optimizer
      • Blank Shape
      • Blank Shape Predictor
      • Circle Grid
      • Deformed
        • Animation Secondary panel
      • Die Compensation
      • Distance Comparison
      • Hydro
      • Hydro Bend
      • Line Mapping
      • Multistage Manager (RADIOSS Incremental)
        • Process Stage Setup
      • Multistage Manager Macro (Incremental_LS-DYNA)
        • Process Stage Setup
      • Multistage Run in Batch Mode
      • Report Generator
      • Springback Positioner
      • Springback Comparison
      • Tool Offset
      • Undercut Check
      • % Thinning
      • Formability
      • HyperForm Post Processing
    • Applications
      • Die Structure Optimization
      • Die Stress Analysis
      • Blank Fit Manager
    • Setup
      • Advanced Panels
        • Advanced (RADIOSS Incremental)
        • Advanced (LS-DYNA Incremental, Die Module)
        • Advanced (LS-DYNA Incremental)
      • Blankholder
      • Component Panels
        • Components (RADIOSS One Step)
        • Components
      • Constraint Panels
        • Constraints (RADIOSS One Step)
        • Constraints
      • Control Cards
      • Contacts
      • Curves
      • Using the Curve Editor
      • Drawbeads
        • Drawbeads (RADIOSS/LS-DYNA Incremental)
          • Drawbead Parameters Definition
        • Drawbeads (RADIOSS Incremental)
        • Drawbeads Editor
      • FLD Curves
      • Materials
        • Materials (Incremental_RADIOSS)
        • Materials (RADIOSS One Step)
      • Materials Database
      • Rename
      • Run Analysis (RADIOSS Incremental/LS-DYNA Incremental)
      • Run Analysis (RADIOSS One Step)
      • Section
      • Symmetry Plane
      • Systems panel
      • Tool Loads
      • Tool Motion
    • Meshing
      • R-Mesh
      • Automesh panel
        • Criteria File Editor
      • Automeshing Secondary panel
        • Local View Pop-Up Menu
      • Quality Index Panel
        • Quality Index Cleanup Tools Secondary Panel
    • Utility Menus
      • Default Utility Menu
      • Utility Menu
      • Disp Macro Menu
      • Die Module
      • Incremental_LS-DYNA Macro Menu
      • Incremental_RADIOSS Macro Menu
      • RADIOSS One Step Macro Menu
      • Process-Driven Utility Menus
    • Commands
      • Alphabetical List of HyperForm Commands
      • Incr RADIOSS Commands
        • *derigidpart
        • *rigidpart
      • One-Step Commands
        • *createblankholder
        • *createdrawbead
        • *createfldplots
        • *createhfmaterial
        • *createsimexcomponent
        • *hfdeleteloadcol
        • *hfsolverdeletedbset
        • *readFldFile
        • *readMaterialFile
        • *saveFldFile
        • *saveMaterialFile
        • *undercut_check
        • *updateblankholder
        • *updatedrawbead
        • *updatehfconstraint
        • *updatehfmaterial
        • *updatehfsolvermaterial
        • displayblankshape
        • hf_getautotippingangles
        • updatesimexcomponent
      • Incr DYNA Commands
        • *setup_gravity
        • *remove_gravity
        • *setup_implicitgravity
        • *remove_implicitgravity
        • *setup_springback
        • *remove_springback
        • *setup_trimming
        • *setup_coarsening
        • *remove_trimming
        • *remove_coarsening
        • *remove_mapping
        • *setup_mapping
    • Panel Descriptions
      • Alphabetical List of Panels
      • Panels Listed by User Profile
        • Die Module Panels
        • RADIOSS One Step Panels
        • Incremental Panels
      • HyperForm Panels
        • Card Editor Panel
        • Color Panel
        • Contour Panel
        • Distance Panel
        • Edit Element Panel
        • Find Panel
        • FLD Plots
        • Geometry Panels
          • Addendum
          • RibEditor
            • Autocleanup
          • Binder
            • Autobinder
          • Defeature Panel
          • Delete Panel
          • Dimensioning Panel
            • Dimensioning Panel Options
            • Advanced Considerations for the Dimensioning Panel
            • Dimension Manipulators
          • Drag Panel
          • Edge Edit panel
          • Length Panel
          • Line Design
          • Line Edit Panel
          • Lines Panel
          • Midsurface Panel
            • Midsurface Panel Flowchart
            • Auto Midsurface Extraction Options
            • Midsurface Rerun
            • Repairing Areas where Automatic Extraction Failed
          • Modify Addendum
          • Node Edit Panel
          • Nodes Panel
            • xyz subpanel (Nodes panel)
            • on geometry subpanel (Nodes panel)
            • arc center subpanel (Nodes panel)
            • extract parametric subpanel (Nodes panel)
            • extract on line subpanel (Nodes panel)
            • interpolate nodes subpanel (Nodes panel)
            • interpolate on line subpanel (Nodes panel)
            • interpolate on surface subpanel (Nodes panel)
            • intersect subpanel (Nodes panel)
          • Point Edit Panel
          • Points Panel
            • xyz subpanel (Points panel)
            • arc center subpanel (Points panel)
            • extract parametric subpanel (Points panel)
            • intersect subpanel (Points panel)
          • Position Panel
          • Project Panel
          • Rotate panel
          • Section Edit
            • Section Editor
          • Solids panel
            • block subbpanel (Solids panel)
            • cylinder full subpanel (Solids panel)
            • cylinder partial subpanel (Solids panel)
            • cone full subpanel (Solids panel)
            • cone partial subpanel (Solids panel)
            • sphere center and radius subpanel (Solids panel)
            • sphere four nodes subpanel (Solids panel)
            • torus center and radius subpanel (Solids panel)
            • torus three nodes subpanel (Solids panel)
            • torus partial subpanel (Solids panel)
            • bounding surfaces subpanel (Solids panel)
            • spin subpanel (Solids panel)
            • drag along vector subpanel (Solids panel)
            • drag along line subpanel (Solids panel)
            • drag along normal subpanel (Solids panel)
            • ruled linear subpanel (Solids panel)
            • ruled smooth subpanel (Solids panel)
          • Surface Edit panel
            • trim with nodes subpanel
            • trim with lines subpanel
            • trim with planes subpanel
            • untrim subpanel
            • offset subpanel
            • extend subpanel
            • extend surfaces options
            • Extending Trapezoidal Surfaces
            • shrink subpanel
          • Surfaces panel
            • square subpanel (Surfaces panel)
              • To create square surface primitives
            • cylinder full subpanel (Surfaces panel)
              • To create full cylinder surface primitives
            • cylinder partial subpanel (Surfaces panel)
              • To create partial cylinder surface primitives
            • cone full subpanel (Surfaces panel)
              • To create full cone surface primitives
            • cone partial subpanel (Surfaces panel)
              • To create partial cone surface primitives
            • sphere center and radius subpanel (Surfaces panel)
              • To create sphere surface primitives by specifying the center and radius
            • sphere four nodes subpanel (Surfaces panel)
              • To create sphere surface primitives by specifying four nodes
            • sphere partial subpanel (Surfaces panel)
              • To create partial sphere surface primitives
            • torus center and radius subpanel (Surfaces panel)
              • To create torus surface primitives by specifying the center and radius
            • torus three nodes subpanel (Surfaces panel)
              • To create torus surface primitives by specifying three nodes
            • torus partial subpanel (Surfaces panel)
              • To create partial torus surface primitives
            • spin subpanel (Surfaces panel)
              • To create surfaces by spinning nodes
              • To create surfaces by spinning lines
            • drag along vector subpanel (Surfaces panel)
              • To create surfaces by dragging lines along a vector
              • To create surfaces by dragging nodes along a vector
            • drag along line subpanel (Surfaces panel)
              • To create surfaces by dragging lines along a line
              • To create surfaces by dragging nodes along a line
            • drag along normal subpanel (Surfaces panel)
              • To create surfaces by dragging lines along their normal
            • ruled subpanel (Surfaces panel)
              • To create surfaces by interpolating linearly between line segments
              • To create surfaces by interpolating linearly between nodes
              • To create surfaces by interpolating linearly between lines and nodes
              • To create surfaces by interpolating linearly between lines
            • spline/filler subpanel (Surfaces panel)
              • To create spline/filler surfaces from lines
              • To create spline/filler surfaces from node lists
              • To create spline/filler surfaces from points
            • skin subpanel (Surfaces panel)
              • To create surfaces by skinning lines
            • fillet subpanel (Surfaces panel)
              • To create fillet surfaces
            • from FE subpanel (Surfaces panel)
              • To create surfaces from an FE mesh
            • meshlines subpanel (Surfaces panel)
              • To create surfaces from an FE mesh
              • To create meshlines from plot elements
          • Vectors Panel
            • To create a vector by defining a base node and a direction
            • To change the display size of the vectors
            • To create a vector by defining two nodes
            • To create a vector from the cross product of two vectors
            • To update vectors
            • To review vectors
            • To find and remove duplicate surfaces
        • Load Result panel
        • Loadcols
        • Mask Panel
        • Meshing Panels
          • Check Elems Panel
            • Check Element Settings Window
          • Count Panel
          • Edges Panel
          • Line Drag Panel
          • Normals Panel
          • Organize Panel
          • Penetration Panel
          • Prep Geom
          • Reflect panel
            • Maintain z-axis direction
            • Maintain element connectivity
          • Renumber panel
          • Ruled Panel
            • To build a surface between two rows of nodes
            • To build a surface between a row of nodes and a line
            • To build a surface between lines or between line segments
          • Scale panel
            • To scale entities
            • To cut a section through a group of lines
          • Skin panel
            • To create a skin surface
          • Spin panel
            • To spin nodes to create a surface
            • To spin a line to create a surface
            • To spin elements
            • To spin a group of elements to create elements with a user-specified bias
          • Spline panel
            • To create a 3-D spline surface by selecting lines
            • To create a 3-D spline surface by selecting nodes or points
          • Split panel
            • To split plate elements
            • To split solid elements
            • To split a row of hexahedral elements
            • To refine a mesh of shell elements to a target element size
            • To refine a mesh of shell elements to a target chordal deviation
          • Temp Nodes panel
            • To add nodes to the temporary node mark
            • To remove nodes from the temporary node mark
            • To clear all of the nodes from the temporary node mark
        • Numbers panel
          • To display entity IDs
          • To turn off the display of IDs of specified data types
          • To turn off the display of all entity IDs
        • Options panel
          • geometry subpanel
          • mesh subpanel
          • graphics subpanel
          • To specify the desired lighting of your model
          • To specify the animation simplification style
          • To specify a bitmap animation preference
          • To change the AVI window size
          • To change the result color type
          • To set the color mode
          • menu config subpanel
          • To change the cursor size
          • To change the menu or graphics font
          • colors subpanel
          • page names subpanel
          • postscript subpanel
          • To set up the hm.cfg file to print PostScript files
          • To create a black and white PostScript file or printout
          • To create a color PostScript file or printout
          • To alter the page length or width
          • To create a *.jpg screen capture
          • To create a JPEG animation file
          • To create a single JPEG image from an animation file
          • graphics file subpanel
        • Part Outline
        • Quick Edit panel
        • Replace panel
        • Smooth panel
          • To smooth plate elements
          • To smooth solid elements
        • Tool Build
        • Translate Panel
          • To translate data
    • FAQs
      • General FAQs
        • How do I interpret metal forming results?
        • What is undercut and how I can detect it in HyperForm?
      • 1Step Analysis FAQs
        • When should I turn on bending unbending effect in a 1Step simulation?
        • Should I use average or directional r values?
        • What are restraining and closure forces for drawbeads in HyperForm?
      • Incremental Analysis FAQs
        • How do I set up rotary action on forming tooling?
        • Why should I set up rigid body stoppers and how?
        • After forming, why do I see small dents within animation results?
        • What is the recommended tool mesh element quality for incremental analyses and how can I identify elements that need to be fixed?
        • Why doesn’t global energy remain the same in incremental analyses?
    • Technical Reference
      • HyperForm One-Step Input Cards
      • Glossary of Terms
      • Typical Material Properties
• HyperMold
  • User's Guide
    • Moldflow User Profile
      • Loading the Moldflow User Profile
      • Using the Moldflow Interface
      • Moldflow Utility Menu
        • Importing Data
        • Midplane Wizard
        • Flow 3D Wizard
        • Solid Meshing Wizard
        • Extract Axis
        • Working with Surfaces
        • Creating Lines
        • Generating Mesh
          • Layered Tet Mesh Submenu
        • Extracting Midsurface Thickness
        • Designing Circuits
        • Design Circuit Submenu
          • Feed System Wizard
          • Feed Design
          • Cooling Circuit Design
        • Edit Prop Cards Submenu
          • Editing Property Cards
        • Diagnostics Submenu
          • Data Conversion
          • Checking Quality
          • Supported Element Property Cards
          • Other Macro Tools
        • BC Submenu
          • Creating Inlet Locations
      • About Occurrence Numbers
      • Exporting Data
      • Visualizing Moldflow Results
    • Moldex3D Solid User Profile
      • Importing CAD Data
      • Moldex3D Solid Utility Menu
        • Extract Axis
        • Moldex3D Wizard
        • Solid Meshing Wizard
        • Runner Meshing Wizard
        • Create Property Cards Submenu
          • Solid Mesh Property Cards
          • Fast Cool Analysis
          • Points Property Cards
          • Boundary Condition Cards
      • Diagnostics
      • Moldex3D Solid MFE Export
    • Moldex3D Shell User Profile
      • Moldex3D Shell Utility Menu
        • Midplane Wizard
        • Generate Mesh
        • Create Property Cards Submenu
          • Assign Thickness
          • Shell Mesh
          • Create/Edit Runner
          • Coolant Channel
          • Points
          • Boundary Conditions
        • Diagnostics
        • Moldex3D MSH Export
    • RTM User Profile
      • RTM Utility Menu
      • RTM Solver Data Files
        • GRF Data File
          • Geometry
          • Nodal Coordinates
          • Element Connectivity
          • Material Data - Preform
          • Assigning Material Data
          • Boundary Conditions
            • Injector BC
            • Vent BC
            • Wall BC
            • NoFlow BC
          • Assigning Boundary Conditions
          • Specifying Functions
          • Solution Extract Function
          • Relative Permability Data
        • Input Command File
          • Functions of the TCL File
          • Available Commands
          • On/Off Switches
          • Session Parameters
          • Time and Nonlinear Loop Control Parameters
      • Molding-RTM Interface
        • Solid Meshing Wizard
        • Material Data - RTM Interface
          • Selecting a Material from the Database
          • Assign Materials to Components
          • Create a New Material
        • Create Table
        • Boundary Conditions for RTM
          • Creating Boundary Conditions
          • Assigning Boundary Conditions to Element Faces
        • Defining Process Parameters for RTM
        • Extracting Points
        • Estimate Time Step Size
        • Estimate Max Injection Pressure
        • Model Summary
• Results Mapper
• Manufacturing Solutions Tutorials
  • HyperForm Tutorials
    • Access the Model Files
    • HF-0010: Introduction to HF Macros
    • HF-0100: General Introduction
    • RADIOSS One Step Tutorials
      • HF-0150: Quick Setup
      • HF-0200: Geometry Cleanup
      • HF-0300: Automeshing
      • HF-0400: Mesh Quality
      • HF-0500: Model Preparation - Undercut Check and Autotipping
      • HF-1000: One-Step Stamping Simulation
      • HF-1010: Increasing Blankholder Pressures
      • HF-1020: Applying Drawbeads and Performing Circle Grid Analysis
      • HF-1030: Transferring Forming Results to Crash Analysis
      • HF-1040: Laser Weld
      • HF-1050: Trim Line Layout
    • Die Module Tutorials
      • HF-2010: Creating a Basic Addendum
      • HF-2020: Creating a Parametric Addendum
      • HF-2030: Creating a Profile Binder and Parametric Addendum
    • RADIOSS Incremental Tutorials
      • HF-3000: Auto Process
      • HF-3010: User Process
      • HF-3020: Setting Up a Multistage Simulation with the User Process
      • HF-3030: Post-Processing Forming Results in HyperView
      • HF-3040: Redraw Forming Analysis from the User Process
      • HF-3050: Gravity Analysis
      • HF-3060: Trimming Analysis
      • HF-3070: Springback Analysis
      • HF-3080: Hot Stamping Analysis
      • HF-3090: Composite Forming Analysis
      • HF-3100: Post-Processing Composite Forming Results in HyperView
      • HF-3110: HydroForming Analysis
      • HF-3120: Tube Bending Analysis
      • HF-3130: Blank Shape Predictor
    • Optimization Tutorials
      • HF-4010: Mesh Morphing
      • HF-4020: Optimization Using RADIOSS One Step
      • HF-4040: Process and Shape Optimization Using Incremental RADIOSS
    •  Result Mapping Tutorials
      • HF-5000: Using Result Mapper in HyperCrash
    • HF-6000: Die Structure Optimization
  • Forging Tutorials
    • Modeling Hot Isothermal Forging Simulation for a T-Joint
  • HyperWeld Tutorials
    • FSW-0010: Introduction to Friction Stir Welding
    • FSW-0020: Butt Joint Analysis
  • HyperXtrude Tutorials
    • HX-0000: Introduction to HyperXtrude
    • Metal Extrusion Tutorials
      • HX-0001: Importing Die Geometry
      • HX-0002: Create and Edit 3D Solids
      • HX-0003: Creating Die Geometry for Solid Profiles
      • HX-0004: How to Use the Project Browser
      • HX-0022: Mesh Generation for Solid Profiles
      • HX-0023: Mesh Generation for Hollow Profiles
      • Guidelines for Non-Hex Meshes
      • HX-0052: Bearing from Nodes
      • HX-0053: Define Bearing Profile from Control Lines
      • HX-0054: Bearing Creation from 3D Bearing Curve
      • HX-0100: HyperXtrude Analysis - Extrusion Wizard
      • HX-0101: Extrusion of a Solid Profile
      • HX-0102: Extrusion of a Solid Profile Die with Pockets
      • HX-0104: Modeling Dies with Symmetry Planes
      • HX-0105: Solid Profile Die with Multiple Exits
      • HX-0106: Indirect Extrusion - Solid Profile
      • HX-0107: Solid Profile Using Existing Mesh
      • HX-0108: Hollow Profile with Existing Mesh
      • HX-0109: Mesh Generation using Solid Map Option
      • HX-0151: Extrusion of a Hollow Profile
      • HX-0155: Indirect Extrusion of a Hollow Profile
      • HX-0201: Tool Deflection Analysis
      • HX-0302: Variable Time Step Analysis
      • HX-0303: Billet Skin Tracking
      • HX-0304: Transverse Weld Length
      • HX-0401: Select/Add New Material Properties
      • HX-0404: Fit Material
      • HX-0427: Add New Presses to the Database
      • HX-0452: Bearing Length Optimization using HyperXtrude and HyperStudy
      • HX-0500: Introduction to HyperView
      • HX-0501: Post Processing
    • Polymer Processing Tutorials
      • HX-1000: Overview of Polymer Processing Tutorials
      • HX-1001: Geometry Cleanup
      • HX-1003: Creating Solids for Meshing
      • HX-1022: Mesh Generation for Solid Profiles
      • HX-1151: Profile Extrusion using Plate Meshing Wizard - Single Holes
      • HX-1152: Free Surface Deformation Analysis
      • HX-1153: Profile Extrusion Using Plate Meshing Wizard - Multiple Holes
      • HX-1154: Boundary Conditions
      • HX-1201: Analysis of a Wire Coating Die
      • HX-1202: Coextrusion Analysis
      • HX-1251: Calibrator Analysis
      • HX-1301: Tool Deflection Analysis
      • HX-1351: Shape Optimization
      • HX-1401 Defining User Area
      • HX-1404: Fitting a New Material into the Database
      • HX-1501: Post Processing
  • HyperMold Tutorials
    • Moldflow Tutorials
      • MF-0010: Introduction to the Moldflow Macro Menu
      • MF-0020: Designing Feed Systems
      • MF-0030: Setting up a Basic Fusion Model
      • MF-0050: Creating a Solid 3D Mesh Starting from Solids for part
      • MF-0051: Creating a Solid 3D Mesh Starting from Surfaces
      • MF-0052: Creating a 3D Mesh Starting from a Surface Mesh
    • Moldex3D Tutorials
      • MX-0010: Extracting Thickness Data from Midsurface
      • MX-0020: Setting Up an MSH Model with Part Using Thickness Extraction
      • MX-0030: Setting Up an MSH Model having Part and Runner
      • MX-0040: Setting Up an MSH Model for Complete Injection Analysis
      • MX-1010: Setting Up an MFE Model by Manual Meshing
      • MX-1020: Settng Up an MFE Model Using the Moldex3D Wizard
      • MX-1030: Setting Up an MFE Model for Fast Cool Analysis
      • MX-1040: Creating a Runner Mesh Using the Runner Meshing Wizard
    • RTM Tutorial
• Altair Help Home

Copyright (c) 2005-2021. Altair Engineering, Inc. All Rights Reserved. Contains trade secrets of Altair Engineering, Inc.  Copyright notice does not imply publication.

Release: 2021