*morphupdateendcondition

Updates the end condition of one or two morph volume edges.

Syntax

*morphupdateendcondition n1 n2 n3 x y z mode

Type

HyperMesh Tcl Modify Command

Description

Updates the end condition of one or two morph volume edges.

Inputs

n1
Node at end of first edge.
n2
Node between first edge and second edge.
n3
Node at end of second edge (if necessary).
x
X component of vector for end direction
y
Y component of vector for end direction
z
Z component of vector for end direction
mode
0 = free
1 = set to vector
2 = master-slave tangency
3 = slave-master tangency
4 = continuous tangency

Example

*morphupdateendcondition (21,22,23,1.0,0.0,0.0,1)

This command either frees the specified edge end, sets the direction of the edge end equal to the given vector, or enforces a tangency condition between two edges. The end of an edge which is affected by this command is marked by n1.

Errors

None.