CablePort
A cable port is created on a cable harness schematic.
Example
app = cf.GetApplication() project = app:OpenFile(FEKO_HOME..[[/shared/Resources/Automation/Cables.cfx]]) -- Add a voltageSource with a magnitude of 1, 50 Ohm impedance and zero phase cableHarness = project.Cables.Harnesses["CableHarness1"] terminal1 = cableHarness.Connectors["CableConnector1"].Pins["Pin2"].Terminal terminal2 = cableHarness.Connectors["CableConnector2"].Pins["Pin1"].Terminal port2 = project.Ports:AddCablePort(cableHarness, terminal1, terminal2) standardConfiguration1 = project.SolutionConfigurations["StandardConfiguration1"] voltageSource1 = standardConfiguration1.Sources:AddVoltageSource(port2) -- Change and existing voltageSource's impedance voltageSource1.Impedance = 75
Inheritance
Property List
- Faulty
- True if the port is faulty. (Read only boolean)
- Harness
- The cable harness. (Read/Write CableHarness)
- Label
- The port label. (Read/Write string)
- Suspect
- True if the port is suspect. (Read only boolean)
- Terminal
- The port terminal. (Read only Terminal)
- Type
- The object type string. (Read only string)
- Visible
- Specifies whether the port must be shown or hidden. (Read/Write boolean)
Method List
- Delete ()
- Delete the port.
- GetProperties ()
- Returns a table of properties representing the state of the object. The properties table can be used with the SetProperties method to change multiple properties of the object in one step. (Returns a table object.)
- SetProperties (properties table)
- Modifies the state of the object using the provided table of properties. This method is used to modify multiple properties of the object in a single step.
Static Function List
- GetDefaultProperties ()
- Creates a table containing the default settings to create an object. (Returns a table object.)
Property Details
- Faulty
- True if the port is faulty.
- Type
- boolean
- Access
- Read only
- Harness
- The cable harness.
- Type
- CableHarness
- Access
- Read/Write
- Label
- The port label.
- Type
- string
- Access
- Read/Write
- Suspect
- True if the port is suspect.
- Type
- boolean
- Access
- Read only
- Terminal
- The port terminal.
- Type
- Terminal
- Access
- Read only
- Type
- The object type string.
- Type
- string
- Access
- Read only
- Visible
- Specifies whether the port must be shown or hidden.
- Type
- boolean
- Access
- Read/Write
Method Details
- Delete ()
- Delete the port.
- GetProperties ()
- Returns a table of properties representing the state of the object. The properties table can be used with the SetProperties method to change multiple properties of the object in one step.
- Return
- table
- A properties table.
- SetProperties (properties table)
- Modifies the state of the object using the provided table of properties. This method is used to modify multiple properties of the object in a single step.
- Input Parameters
- properties(table)
- A table of properties defining the new state of the object.
Static Function Details
- GetDefaultProperties ()
- Creates a table containing the default settings to create an object.
- Return
- table
- The default properties table.