CableSchematicVoltageProbe
A cable voltage probe component.
Example
app = cf.GetApplication() project = app:OpenFile(FEKO_HOME..[[/shared/Resources/Automation/Cables.cfx]]) -- Add a 'CableSchematicVoltageProbe' cableHarness = project.Cables.Harnesses["CableHarness1"] terminal1 = cableHarness.Connectors["CableConnector2"].Pins["Pin2"].Terminal terminal2 = cableHarness.Connectors["CableConnector2"].Pins["Pin1"].Terminal voltageProbe = cableHarness.SchematicComponents:AddVoltageProbe(terminal1, terminal2) -- Get the terminals that the 'CableSchematicVoltageProbe' is connected to terminalList = cableHarness.SchematicComponents["P1"].Terminals
Inheritance
The CableSchematicVoltageProbe object is derived from the CableSchematicComponent object.
Property List
Collection List
- Terminals
- The collection of schematic terminals on the symbol. (TerminalCollection of Terminal.)
Method List
Static Function List
- GetDefaultProperties ()
- Creates a table containing the default settings to create an object. (Returns a table object.)
Property Details
- Label
- The object label.
- Type
- string
- Access
- Read/Write
- Position
- The schematic symbol position.
- Type
- SchematicSymbolPosition
- Access
- Read only
- Type
- The object type string.
- Type
- string
- Access
- Read only
Collection Details
- Terminals
- The collection of schematic terminals on the symbol.
- Type
- TerminalCollection
Method Details
- Delete ()
- Deletes the component from the cable schematic.
- Rotate ()
- Rotates the symbol 90 degrees clockwise.
Static Function Details
- GetDefaultProperties ()
- Creates a table containing the default settings to create an object.
- Return
- table
- The default properties table.