# SolutionHarnessSchematicSettings

The solution harness schematic settings.

## Example

app = cf.GetApplication()
project = app:OpenFile(FEKO_HOME..[[/shared/Resources/Automation/Cables.cfx]])

schematicSettings = project.Cables.Harnesses[1].SchematicSettings

-- Use the SchematicSettings to modify the projection type

schematicSettings.ProjectionType = cf.Enums.CableHarnessSchematicProjectionMethodEnum.XZPlane


## Usage locations (object properties)

The following objects have properties using the SolutionHarnessSchematicSettings object:

## Property List

ConnectorSpacing
The connector spacing. This must be a value in the range [25, 1000]. (Read/Write number)
CrossSectionsVisible
True if the cross sections are visible on the schematic. (Read/Write boolean)
ProjectionType
The projection of the cable harness from 3D space to 2D space. (Read/Write CableHarnessSchematicProjectionMethodEnum)

## Property Details

ConnectorSpacing
The connector spacing. This must be a value in the range [25, 1000].
Type
number
Access