RepairAndSewFacesSettings
A settings object for repairing and sewing geometry faces.
Example
app = cf.GetApplication() project = app:NewProject() -- Get the settings for repairing and sewing faces repairFacesSettings = project.Geometry.Repair.RepairAndSewFacesSettings -- Get the setting for the sew tolerance used for sewing the sheets tolerance = repairFacesSettings.SewTolerance
Inheritance
The RepairAndSewFacesSettings object is derived from the RepairSettings object.
Usage locations (object properties)
The following objects have properties using the RepairAndSewFacesSettings object:
Property List
- AngularTolerance
- The tangent change angle in degrees above which G1 discontinuities will be removed by splitting rather than smoothing. (Read/Write Expression)
- ReplaceMissingGeometryEnabled
- If this option is selected, the tool will attempt to generate surface geometry for faces that will cap holes in the resulting body. (Read/Write boolean)
- SewTolerance
- The tolerance to be used when sewing the sheets. (Read/Write Expression)
- Type
- The object type string. (Read only string)
Method List
- GetProperties ()
- Returns a table of properties representing the state of the object. The properties table can be used with the SetProperties method to change multiple properties of the object in one step. (Returns a table object.)
- RestoreDefaults ()
- Restores all the settings to their default values.
- SetProperties (properties table)
- Modifies the state of the object using the provided table of properties. This method is used to modify multiple properties of the object in a single step.
Property Details
- AngularTolerance
- The tangent change angle in degrees above which G1 discontinuities will be removed by splitting rather than smoothing.
- Type
- Expression
- Access
- Read/Write
- ReplaceMissingGeometryEnabled
- If this option is selected, the tool will attempt to generate surface geometry for faces that will cap holes in the resulting body.
- Type
- boolean
- Access
- Read/Write
- SewTolerance
- The tolerance to be used when sewing the sheets.
- Type
- Expression
- Access
- Read/Write
- Type
- The object type string.
- Type
- string
- Access
- Read only
Method Details
- GetProperties ()
- Returns a table of properties representing the state of the object. The properties table can be used with the SetProperties method to change multiple properties of the object in one step.
- Return
- table
- A properties table.
- RestoreDefaults ()
- Restores all the settings to their default values.
- SetProperties (properties table)
- Modifies the state of the object using the provided table of properties. This method is used to modify multiple properties of the object in a single step.
- Input Parameters
- properties(table)
- A table of properties defining the new state of the object.