RepairPartsSettings
A settings object for repairing geometry parts.
Example
app = cf.GetApplication() project = app:NewProject() -- Get the settings for repairing geometry parts repairPartsSettings = project.Geometry.Repair.RepairPartsSettings -- Get the setting for the upper bound on deviation between original and repaired geometry deviation = repairPartsSettings.DeviationUpperBound
Inheritance
The RepairPartsSettings object is derived from the RepairSettings object.
Usage locations (object properties)
The following objects have properties using the RepairPartsSettings object:
Property List
- AdvancedSelfIntersectionRemovalEnabled
- This option enables a more thorough self-intersection removal process. This property is only valid if RemoveSelfIntersectionsEnabled is true. (Read/Write boolean)
- DeviationUpperBound
- The upper bound on deviation between original and repaired geometry. (Read/Write Expression)
- MaxSmallEdgeLength
- The maximum length of small edges. This property is only valid if RemoveSmallEdgesEnabled is true. (Read/Write Expression)
- RemoveDiscontinuitiesEnabled
- The option to remove discontinuities. (Read/Write boolean)
- RemoveSelfIntersectionsEnabled
- The option to remove self-intersections. (Read/Write boolean)
- RemoveSmallEdgesEnabled
- The option to remove small edges during the repair operation. (Read/Write boolean)
- RepairBadFaceFaceErrorsEnabled
- The option to repair bad face-face errors. (Read/Write boolean)
- SimplifyGeometryDuringCleaningEnabled
- The option to simplify geometry during repairing. (Read/Write boolean)
- SimplifyPartSettings
- The simplify part settings. These properties are only valid if SimplifyGeometryDuringCleaningEnabled is true. (Read only SimplifyPartSettings)
- SimplifyToBlends
- The options for simplifying surfaces to blends. (Read/Write RepairPartSimplifyBlendTypeEnum)
- SmootheningAngularTolerance
- The angular tolerance for geometry smoothening (degrees). This property is only valid if RemoveDiscontinuitiesEnabled is true. (Read/Write Expression)
- SpecifiedEdgeRepairTolerance
- The specified edge repair tolerance. This property is only valid if SpecifyEdgeToleranceEnabled is true. (Read/Write Expression)
- SpecifyEdgeToleranceEnabled
- The option to specify an edge repair tolerance. (Read/Write boolean)
- SuppressSurfaceModificationsEnabled
- The option to suppress surface modifications. (Read/Write boolean)
- Type
- The object type string. (Read only string)
Method List
- GetProperties ()
- Returns a table of properties representing the state of the object. The properties table can be used with the SetProperties method to change multiple properties of the object in one step. (Returns a table object.)
- RestoreDefaults ()
- Restores all the settings to their default values.
- SetProperties (properties table)
- Modifies the state of the object using the provided table of properties. This method is used to modify multiple properties of the object in a single step.
Property Details
- AdvancedSelfIntersectionRemovalEnabled
- This option enables a more thorough self-intersection removal process. This property is only valid if RemoveSelfIntersectionsEnabled is true.
- Type
- boolean
- Access
- Read/Write
- DeviationUpperBound
- The upper bound on deviation between original and repaired geometry.
- Type
- Expression
- Access
- Read/Write
- MaxSmallEdgeLength
- The maximum length of small edges. This property is only valid if RemoveSmallEdgesEnabled is true.
- Type
- Expression
- Access
- Read/Write
- RemoveDiscontinuitiesEnabled
- The option to remove discontinuities.
- Type
- boolean
- Access
- Read/Write
- RemoveSelfIntersectionsEnabled
- The option to remove self-intersections.
- Type
- boolean
- Access
- Read/Write
- RemoveSmallEdgesEnabled
- The option to remove small edges during the repair operation.
- Type
- boolean
- Access
- Read/Write
- RepairBadFaceFaceErrorsEnabled
- The option to repair bad face-face errors.
- Type
- boolean
- Access
- Read/Write
- SimplifyGeometryDuringCleaningEnabled
- The option to simplify geometry during repairing.
- Type
- boolean
- Access
- Read/Write
- SimplifyPartSettings
- The simplify part settings. These properties are only valid if SimplifyGeometryDuringCleaningEnabled is true.
- Type
- SimplifyPartSettings
- Access
- Read only
- SimplifyToBlends
- The options for simplifying surfaces to blends.
- Type
- RepairPartSimplifyBlendTypeEnum
- Access
- Read/Write
- SmootheningAngularTolerance
- The angular tolerance for geometry smoothening (degrees). This property is only valid if RemoveDiscontinuitiesEnabled is true.
- Type
- Expression
- Access
- Read/Write
- SpecifiedEdgeRepairTolerance
- The specified edge repair tolerance. This property is only valid if SpecifyEdgeToleranceEnabled is true.
- Type
- Expression
- Access
- Read/Write
- SpecifyEdgeToleranceEnabled
- The option to specify an edge repair tolerance.
- Type
- boolean
- Access
- Read/Write
- SuppressSurfaceModificationsEnabled
- The option to suppress surface modifications.
- Type
- boolean
- Access
- Read/Write
- Type
- The object type string.
- Type
- string
- Access
- Read only
Method Details
- GetProperties ()
- Returns a table of properties representing the state of the object. The properties table can be used with the SetProperties method to change multiple properties of the object in one step.
- Return
- table
- A properties table.
- RestoreDefaults ()
- Restores all the settings to their default values.
- SetProperties (properties table)
- Modifies the state of the object using the provided table of properties. This method is used to modify multiple properties of the object in a single step.
- Input Parameters
- properties(table)
- A table of properties defining the new state of the object.