*Rotation()

Specifies the rotation setting for the added part.

Syntax

*Rotation (RX_Value, RY_Value, RZ_Value)

Application

HyperView

Inputs

RX_Value: Rotation in the X-direction.
RY_Value: Rotation in the Y-direction.
RZ_Value: Rotation in the Z-direction.

Example

*Rotation("0.000000 0.000000 -179.999985")

Comments

This statement captures the rotation of the added part in the X, Y, and Z directions. This statement is written out only if this value has been changed by the user.