*CVJointPair()

Creates a constant velocity joint pair.

Syntax

*CVJointPair(joint_name,"joint_label",body_1, body_2, origin, POINT|VECTOR, point_1|vector_1, POINT|VECTOR, point_2|vector_2, [ALLOW_COMPLIANCE])

Arguments

joint_name
The variable name of the constant velocity joint pair.
Data type: varname
joint_label
The descriptive label of the constant velocity joint pair.
Data type: label
body_1
The first body or body pair constrained by the constant velocity joint pair.
Data type: Body or BodyPair
body_2
The second body or body pair constrained by the constant velocity joint pair.
Data type: Body or BodyPair
origin
The location(s) of the constant velocity joint pair for body_1.
Data type: Point or PointPair
POINT|VECTOR
A keyword that indicates the alignment method.
point_1|vector_1
An entity variable referring to a Point, PointPair, Vector, or VectorPair which is based on the above keyword.
Data type: Point, PointPair, Vector, or VectorPair
POINT|VECTOR
A keyword that indicates the alignment method.
point_2|vector_2
An entity variable referring to a Point, PointPair, Vector, or VectorPair which is based on the above keyword.
Data type: Point, PointPair, Vector, or VectorPair
ALLOW_COMPLIANCE
An optional argument that indicates the joint pair can be made compliant.

Example

*BodyPair(b_hs, "Housing", p_hs_cm)
*BodyPair(b_spindle, "Spindle, p_spindle_cm)
*PointPair(b_spalign, "Spindle alignment point")
*PointPair(p_wc, "Wheel center")
*PointPair(p_inr_cv, "Inner CV joint")
*CVJointPair(j_otr_cv, "Outer CV joint", 
b_hs, 
b_spindle, 
p_spalign, 
POINT, 
p_wc, 
POINT, 
p_inr_cv, 
ALLOW_COMPLIANCE)

Context

*BeginMdl()

*DefineAnalysis()

*DefineSystem()

Properties

Table 1.
Property Returns Data Type Description
b1 BodyPair The first body pair constrained by the constant velocity joint pair.
b2 BodyPair The second body pair constrained by the constant velocity joint pair.
i MarkerPair The marker pair on b1.
isbush boolean See ^Comments^.
j MarkerPair The marker pair on b2.
l CVJoint The left constant velocity joint.
label string The descriptive label of the constant velocity joint pair.
r CVJoint The right constant velocity joint.
state boolean Control state (TRUE or FALSE).
varname string The variable name of the constant velocity joint pair.

Comments

When a point is used (instead of a vector) to define an axis, it is obtained as the direction from the origin of the joint to the specified point.

The individual joints of a *CVJointPair() can be referred to as joint_name.l (left constant velocity joint) and joint_name.r (right constant velocity joint). The ALLOW_COMPLIANCE argument is optional. When it is included, it indicates that the joint pair can be made compliant. In compliant mode, such joint pairs act as bushing pairs.

The isbush property is valid only for joint pairs that can be made compliant. When isbush is set to FALSE, the joint pairs act like kinematic joints (in a noncompliant mode). When isbush is set to TRUE, the joint pair acts like a bushing pair (in a compliant mode). When the compliant option in a system is switched to "non-compliant", all the joint pairs in the system act as kinematic joints. However, when the system option is switched to "compliant", only the joint pairs that are created with an ALLOW_COMPLIANCE flag act as bushing pairs. The rest of the joint pairs continue to behave as kinematic joints.