/GRNOD/NODENS
Block Format Keyword Describes the unsortable node number groups.
Format
Enter node numbers in the desired order (any number may be input, 10 per Line)
| (1) | (2) | (3) | (4) | (5) | (6) | (7) | (8) | (9) | (10) |
|---|---|---|---|---|---|---|---|---|---|
| /GRNOD/NODENS/grnd_ID/unit_ID | |||||||||
| grnd_title | |||||||||
| node_ID1 | node_ID2 | node_ID3 | node_ID4 | node_ID5 | node_ID6 | node_ID7 | node_ID8 | node_ID9 | node_ID10 |
Definitions
| Field | Contents | SI Unit Example |
|---|---|---|
| grnd_ID | Node group
identifier (Integer, maximum 10 digits) |
|
| unit_ID | Unit Identifier (Integer, maximum 10 digits) |
|
| grnd_title | Node group
title (Character, maximum 100 characters) |
|
| node_ID1, node_ID2..., node_ID10 | List of secondary node
identifiers (Integer) |
Comments
- Node groups are used to define secondary nodes of rigid walls, interfaces, rigid bodies or nodes to which a load is applied, like a concentrated load or a fixed velocity.
- Nodes are not stored by Radioss. This option is only needed in interface TYPE8 and /XELEM.