Organize Entities

Use the Organize tool to move or copy entities into their proper destinations.

1. Select entities in the modeling window.
2. Open the Organize tool in the following ways:
   • Right-click and select Organize from the context menu.
   • Press O.
   • From the Assembly ribbon, click the Organize tool.

     
     
     Figure 1.

3. Optional: Click on the guide bar to organize associated elements with geometry.
4. Use the first selector to select entities to move.
5. Use the second selector to select the destination collector.
   Note: When you select a source entity type, the destination selector automatically updates to the corresponding collector. The opposite is also true. You can select a destination collector first and the source entity type automatically updates.

   Note: For LS-DYNA or Radioss profiles, organizing entities to an include file automatically identifies all references of the entities. You can also drag and drop an entity into an include file.

   
   
   Figure 2.

6. Optional: Activate the Copy checkbox to copy the selected entities to the specified collector, so that they exist in both the original and new collectors.
   Entities cannot be copied to an include file or modules.
7. On the guide bar, click one of the following:
   • - Save changes and stay in the tool
   • - Save changes and close the tool
   • - Exit the tool without saving changes