iso6487

Filters a signal with an ISO6487 filter.

Syntax

y = iso6487(x,fs,cfc)

Inputs

x
The signal to be filtered. If x is a matrix, each column is filtered.
Type: double
Dimension: vector | matrix
fs
The sampling frequency.
Type: double
Dimension: scalar
cfc
The channel frequency class of the filter (typically 60 or 180).
Type: double
Dimension: vector

Outputs

y
The filtered signal.

Example

Filter a 100 Hz signal bi-directionally, sampled at 10,000 Hz, with a class 60 filter.

t = [0:0.0001:0.02];
input = sin(2*pi*100*t);
plot(t,input);
hold on;
output = iso6487(input, 10000, 60);
plot(t,output);
legend('input','output');


Figure 1. filter

Comments

iso6487 is based on the ISO 6487 standard. It uses a bi-directional, second order low pass Butterworth filter with mirror padding. The cfc is approximately 60% of the 3dB cutoff frequency.

fs should be at least 10 times cfc.