cross

This command draws a cross-shaped surface.

Inline mode usage

cross -h
Displays the help file that summarizes the parameters for this command.
cross –n <name> -p <x> <y> <z> <sizeA> <sizeB>
Draws a cross named <name> and centered at the specified point <x> <y> <z>. <sizeA> determines the side length of the central square of the cross, while <sizeB> determines one of the sides (i.e. the one not shared with the central square) of each of the external rectangles.

Interactive mode usage

Invocation
cross
Parameters
  • Center point, in "x y z" format: x y z.
  • Size A, length: sizeA.
  • Size B, width: sizeB.

The meanings of both sizes are specified above.

Example

> cross
Select center [x y z]: 0 0 0
Set Size A: 2
Set Size B: 3

Result:



Figure 1. Resulting cross