Data Fields

Detailed Description

Structure for receiver configuration if trajectory mode is on.

Field Documentation

const char * WinProp_Trajectory::Name
The name of the trajectory
int WinProp_Trajectory::NrPoints
The number of points
WinProp_Trajectory_Point * WinProp_Trajectory::Points
The points defining the trajectory. The first element will be the start of the trajectory, while the last element defines the end. Array of length NrPoints
int WinProp_Trajectory::samplingMode
The sampling mode.
  • 0 = Sample the distance between evaluation points.
  • 1 = Sample the time between evaluation points.
double WinProp_Trajectory::samplingResolution
The sampling resolution. Based on samplingMode either in seconds or in meter.
int WinProp_Trajectory::addPointsToSamples
Defines if the in Points defined locations are part of the trajectory samples.
  • 1 = the in Points defined locations will be part of the trajectory samples and effectively only between those points the sampling will be done
  • 0 = the in Points defined locations will not necessarily be part of the samples
int WinProp_Trajectory::HeightAbsolute
Height definition of receiving antenna.
  • 0 = Height relative to ground
  • 1 = Height absolute to sea level
  • 2 = Height relative to floors (only in case of indoor scenarios)
double WinProp_Trajectory::PointSize
Size of the predicted points, needs to be identical for all trajectories provided to WinProp_Predict_Trajectories.
The documentation was generated from the following file:
  • source.eng/Interface/Engine.h