Plot Dynamics Response at Point/Face

Plot the dynamics response at a selected point/face.

  1. In the Project Tree, open the Analysis Workbench.
  2. On the workbench toolbar, click the (Pick info) icon.
  3. In the dialog, choose a Response type from the drop-down menu.
  4. Activate the radio button for Pick point, Pick face, or Choose datum point set.
    Note: The Datum point set will only be available if Datum points are present in the model. If this is the case, you can select a point set from the drop-down menu.
  5. In the modeling window, select points/faces on the model.
  6. Optional: You can view multiple XY graphs at once by activating the Show each plot in a separate window checkbox.
  7. Optional: Activate the Hide labels checkbox to hide the display of points' label and ID in the graphics.
    The results will be plotted in the XY graph in the dialog. You can use the scroll wheel to zoom in, the left mouse button to pan, or the Refit button to reset the graph.
    Note: The selection by face option provides an average of the result value over the selected face.