/ANIM/SHELL/IDPLY/EPSP

Engine Keyword Generates animation files containing plastic strain for shell elements that use ply-based composite properties, /PROP/STACK (TYPE17), /PROP/TYPE51, or /PCOMPP.

Format

/ANIM/SHELL/IDPLY/EPSP/Keyword5/Keyword6

Definitions

Data	Description	SI Unit Example
`Keyword5`	Ply output: I Ply ID number Integration point `Keyword6` must also be entered. ALL All the integration point results of all the plies are output.
`Keyword6`	Output location. Only used if `Keyword5` is entered. J j’th integration point of the Ply I

Data

Description

SI Unit Example

Keyword5

Ply output:

I: Ply ID number; Integration point Keyword6 must also be entered.

ALL: All the integration point results of all the plies are output.

Keyword6

Output location. Only used if Keyword5 is entered.

J: j’th integration point of the Ply I

Comments

Ply ID number is prop_ID from /PROP/TYPE19 (PLY)/prop_ID or ply_ID from /PLY/ply_ID.
For fully integrated BATOZ shells, I_shell=12, the output value is the average of the in-plane Gauss points.