# WinProp_Carrier

## Detailed Description

Configuration of Carriers.

## Field Documentation

CarrierID
int WinProp_Carrier::CarrierID
Index of carrier (if network planning API is used afterwards).
SystemID
int WinProp_Carrier::SystemID
Index of system to which the antenna belongs. If SystemID == -1, the antenna does not belong a system.
• Same carrier, different SystemID => Interference
• Same carrier, same SystemID => No interference
• Different carriers (independent of SystemID) => No interference
MimoID
int WinProp_Carrier::MimoID
Index of MIMO stream assigned to this antenna. If MimoID == -1, it is a regular antenna. Antennas of MIMO systems must be in the same system, i.e. SystemID must be set to the same value for all antennas belonging to the MIMO system. The first antenna in a MIMO system has MimoID == 1, the second antenna has MimoID == 2 and so on.
Load of this cell, only relevant for network planning (see WinProp_Net_Project_Open). Set to -1 to use the default load. Needs to be in the interval [0.0, 1.0].
NoiseRiseUL
float WinProp_Carrier::NoiseRiseUL
The noise rise [dB] in uplink for static analysis, only relevant for network planning (see WinProp_Net_Project_Open). Set to -1 to use the default value.
PowerBackoffPilotDL
float WinProp_Carrier::PowerBackoffPilotDL
The power backoff for pilot [dB], relative to max. power. Only relevant for network planning (see WinProp_Net_Project_Open). Set to -1 to use the default value.
Numerology
int WinProp_Carrier::Numerology
The numerology. Only relevant for 5G network planning.
SymbolsPerSlot
int WinProp_Carrier::SymbolsPerSlot
Number of symbols per slot. Only relevant for 5G network planning.
NrAntennaBeams
int WinProp_Carrier::NrAntennaBeams
Number of antenna beams. Only relevant for 5G network planning.
BeamGainCtrlServer
double WinProp_Carrier::BeamGainCtrlServer
Beamforming Gain for control serving carrier. Only relevant for 5G network planning.
BeamGainCtrlInterferer
double WinProp_Carrier::BeamGainCtrlInterferer
Beamforming Gain for control interfering carrier. Only relevant for 5G network planning.
BeamGainDataServer
double WinProp_Carrier::BeamGainDataServer
Beamforming Gain for data serving carrier. Only relevant for 5G network planning.
BeamGainDataInterferer
double WinProp_Carrier::BeamGainDataInterferer
Beamforming Gain for data interfering carrier. Only relevant for 5G network planning.
TDD_Slots_DL
int WinProp_Carrier::TDD_Slots_DL
Number of downlink symbols in a slot. Only relevant for TDD 5G network planning.
TDD_Slots_UL
int WinProp_Carrier::TDD_Slots_UL
Number of uplink symbols in a slot. Only relevant for TDD 5G network planning.
TDD_Slots_Flex
int WinProp_Carrier::TDD_Slots_Flex
Number of flexible symbols in a slot. Only relevant for TDD 5G network planning.
The documentation was generated from the following file:
• source.eng/Interface/WP_Carrier.h