AcuSolve Launch Settings
After meshing the model and setting the boundary conditions the model setup is ready for solving.
The solver can be launched by clicking icon.
- Problem Name
- Specifies the name of the problem. All of the files during the solutions are created based on this name.
- Problem Directory
- Specifies the directory in which the input files for the problem are present.
- Working directory
- Specifies the directory in which the solution files are written.
- Solver Modules
- Specifies the type of solvers to be run. Solver modules include Prep, View, Solve, Prep-Solve and all.
- Prep
- Performs only the pre-processing of the model using AcuPrep module.
- View
- Performs only pre-processing of radiation parameters using the AcuView module.
- Solve
- Performs only the solver module of AcuSolve.
- Prep-Solve
- Performs the pre-processing of the flow parameters and solves the problem.
- all
- Performs all the modules of pre-processing and solving modules.
- User Library list
- If the simulation uses a user-defined function (UDF) then the name of compiled file should be placed for this parameter.
- User argument list
- Specifies the list of arguments to be passed on to the User Library list.
- Number of Processors
- Specifies the number of processors for running the problem.
- Generate AcuSolve input files
- Flag specifying whether or not to generate the input files.
- Launch AcuSolve
- Flag specifying whether or not to launch the solving process.
- Run on remote host
- Flag to specify whether to run on remote host/cluster.
- From problem
- Name of the problem from which restart has to be initiated.
- From directory
- Directory in which the previous solution files are present.
- From run
- Specifies the number of the run from which restart has to be initiated. A value of zero uses the last run available.
- From time step
- Specifies the time step from which the run has to be initiated. A value of zero uses the last available time step.
- Reset time step
- Flag specifying whether the time step numbering should be followed from the previous solution.
- Reset time increment
- Flag specifying whether to use the time increment from the previous problem. Using on uses the time increment mentioned in the present run.