Load Add Creation Tutorial

Add Static Loads.

  1. Click Static from Select Subcase drop down list.
    The drop down list shows the subcases created in the Subcase Creation Tutorial step.
    Figure 1.
    All the Static present in the subcase will be listed in the first table of the panel.
  2. Enter 1.0 as the scaling factor in Scale Factor field.
  3. Select the listed Static loads to use in creating a combined loadadd collector.
  4. Click Add.
    A loadadd collector is created and listed in the second table.
    Figure 2.
  5. Click the radio button for the created load to activate it.
  6. Click Next to proceed to the next step in the process.
    Note: You should create and activate at least one load collector in this panel before moving to the next step.