Immovable Constraints

Enforce zero translational displacements in all directions on faces, edges, vertexes, and/or spots.

  1. In the Project Tree, open the Analysis Workbench.
  2. On the workbench toolbar, click the (Immovable support) icon.
  3. Specify which type of entity will have constraints applied.
  4. Optional: If applying to Faces, you can select the Add tangent faces check box.
  5. Optional: If applying to Spots, you can create new spots by clicking Create new spot.
  6. In the modeling window, click to select specific parts on the model.
  7. Click OK.