Create Output on Section Cuts
Use the Section cut tool to select planes on which you would like to export the volume variables at given intervals.
-
Create section cuts.
- In the microdialog, define the output frequency and start output at iteration.
-
In the microdialog, click
and specify the variables to export.
-
Edit the size of the section cut plane in the modeling window by completing one of the following:
- In the microdialog, click
and edit the sizing values.
- Click an edge of the plane and drag the arrow to lengthen or shorten the
selected side of the plane.
Figure 3.
- In the microdialog, click
-
Move the section cut plane in the modeling window.
- Select the section cut plane.
-
In the microdialog, select
.
- Use the graphical manipulator to move the section cut plane.
-
From the guide bar, complete one of the following:
- Select
to confirm your selection and continue creating section cuts.
- Select
to confirm your selection and exit the tool.
- Select