**MV-1015: Using Spline3D to Model Combustion Forces in an Engine**

In this tutorial you will learn how to use Spline3D to model an input which depends on two independent variables.**MV-7007: Add Friction to Joints**

In this tutorial, you will learn more about the MotionSolve joint friction model, how to model Joint friction in MotionView/MotionSolve, and how to review the friction results.**MV-1027: Model a Point-to-Deformable-Curve (PTdCV) Higher-Pair Constraint**

In this tutorial, you will learn how to model a PTdCV joint (point-to-deformatble-curve) joint.**MV-1028: Model a Point-to-Deformable-Surface Higher-Pair Constraint**

In this tutorial, you will learn how to model a PTdSF (point-to-deformable-surface) joint.**MV-1029: Model a Point-to-Deformable-Surface Force (PTdSF)**

In this tutorial you will learn how to model a PTdSF (point-to-deformable-surface) joint with a contact force.**MV-2050: Linear Analysis for Stability and Vibration Analysis**

In this tutorial, you will learn how to perform a linear analysis using MotionView and MotionSolve. You will also learn how to interpret its results and use the same for improving the stability of your systems.**MV-2051: Frequency Response Analysis using MotionSolve and Compose**

In this tutorial, you will learn how to convert a multibody model to its equivalent state space form using MotionSolve and obtain corresponding matrices, use these state space matrices to construct an equivalent LTI system of the multibody model within Altair’s Compose, and perform a frequency response analysis on the LTI system by plotting a Bode Plot diagram.**MV-7003: Simulating a Single Input Single Output (SISO) Control System Using MotionView and MotionSolve**

In this tutorial, you will learn how to implement a single input single output (SISO) controller in MotionView and solve it using MotionSolve.**MV-7000: Model Differential Equations Using MotionView and MotionSolve**

In this tutorial, you will build a model and apply solver variables and differential equations before running the model.**MV-7012: Functional Mockup Unit (FMU) in MotionView and MotionSolve**

In this tutorial, you will learn about the use of FMU in MotionView and MotionSolve.**MV-7004: Inverted Pendulum Control Using MotionSolve and MATLAB**

In this tutorial, you will learn how to use MotionView and MotionSolve to design a control system that stabilizes an inverted pendulum.