Review All Loadcases

Review loadcases present in the model.

You can review and verify all the loadcases in the model and choose which loadcase to export in the OptiStruct solver file.

  1. From Analyze group, select Review All Load Cases.
    Figure 1.
    Load Step Table will appear containing all the loadcases present in the session.
    Figure 2.
    Note: Depending on the type of event, the loadcases will be populated in the respective tabs of the table.
  2. Check the boxes against the required loadcases under Export column.
    This will export only the selected loadcase to the OptiStruct solver file.
  3. Click Close.

Review All Loadcases Options

Description of Review All Loadcases Options.

Dynamic Event Loadcases
Add () or Delete () loadcases.
Below is the table for a dynamic event-
Figure 3.
Columns of the table are-
ID
Load Step ID
Name
Name of the loadstep
Load Directions
Loading directions defined for the loadstep
Load Type
Type of Load
Source
Load definition source
Time Length
Load application time length in seconds (s)
Export
Select required load step to export
Static Event
Below is the table for a static event-
Figure 4.
Amplitude
Load amplitude value
All other columns are same as dynamic event table.
Thermal Event
Below is the table for a thermal event-
Figure 5.