New Sketch
Start a new sketch and select a sketch plane.

-
Create a new sketch plane by defining a plane.
-
Select one of the global planes.
Figure 1. -
If needed, use the Vector tool to modify the
plane's orientation.
Figure 2. -
Click
on the guide bar.
-
Once the plane is accepted, the new sketch entity is added and you can
start sketching using the Create tools.
Figure 3.
-
Select one of the global planes.
-
Create a new sketch plane by selecting a face.
- Change the entity selector on the guide bar to Surface.
-
Select a surface to use as a reference plane.
Figure 4.
-
Click
on the guide bar.
-
Once the plane is accepted, the new sketch entity is added and you can
start sketching using the Create tools.
Figure 5.
Tip:- For a surface selection, the cursor click location becomes an origin of the sketch plane.
- At this origin, the plane normal is calculated and intersected with the part that the surface belongs to.