Predefined Overset Mesh Volume
-
From the ultraFluidX ribbon,
Setup group, click
the Identify Parts tool.
Figure 1. -
From the secondary tool set, click the Overset Mesh Rotating
Fan tool.
Figure 2. - From the guide bar, select Rotating Volume.
- In the modeling window, select the desired overset mesh volume.
- Optional:
Use the microdialog to edit the volume.
- Edit the RPM.
- Edit the mesh refinement level.
-
Click
and and use the graphical manipulators to move the cylinder.
-
Click
to change the direction of the rotation.
Figure 3. - From the guide bar, select Check Containment.
- In the modeling window, select fan parts.
-
From the guide bar, complete one of the following:
- Select
to confirm your selection and continue creating fans.
- Select
to confirm your selection and exit the tool.
- Select