Intellectual Property Rights Notice
Copyrights, trademarks, trade secrets, patents and third party software licenses.
Altair PBS Works™ v. 2021.1.0 Copyright © 1994-2021.
Altair Engineering Inc. Copyright © 1986-2021. All Rights Reserved.
Copyrights in the below are held by Altair Engineering, Inc., except where otherwise explicitly stated. This Intellectual Property Rights Notice is exemplary, not exhaustive.
Altair HPC & Cloud Products
Altair® PBS Professional® ©1994-2021
Altair Control™ ©2008-2021; (formerly PBS Control)
Altair Access™ ©2008- 2021; (formerly PBS Access)
Altair Accelerator™ ©1995- 2021; (formerly NetworkComputer)
Altair Accelerator Plus™ ©1995- 2021; (formerly WorkloadXelerator)
Altair FlowTracer™ ©1995- 2021; (formerly FlowTracer)
Altair Allocator™ ©1995- 2021; (formerly LicenseAllocator)
Altair Monitor™ ©1995- 2021; (formerly LicenseMonitor)
Altair Hero™ ©1995- 2021; (formerly HERO)
Compute Manager™ ©2012-2017 is now part of Altair Access
Display Manager™ ©2013-2017 is now part of Altair Access
PBS Application Services™ ©2008-2017 is now part of Altair Access
PBS Analytics™ ©2008-2017 is now part of Altair Control
PBS Desktop™ ©2008-2012 is now part of Altair Access, specifically Altair Access desktop, which also has Altair Access web and Altair Access mobile
e-Compute™ ©2000-2010 was replaced by “Compute Manager” which is now Altair Access
Altair Simulation Products
Altair AcuConsole™ ©2006-2021
Altair AcuSolve™ ©1997-2021
Altair Activate® ©1989-2021 (formerly solidThinking Activate)
Altair Compose® ©2007-2021 (formerly solidThinking Compose)
Altair ConnectMe™ ©2014-2021
Altair EDEM™ ©2005-2021 DEM Solutions Ltd, © 2019-2021 Altair Engineering, Inc.
Altair ElectroFlo™ ©1992-2021
- Altair Embed SE ©1989-2021 (formerly solidThinking Embed SE)
- Altair Embed / Digital Power Designer ©2012-2021
- Altair Embed Viewer ©1996-2021
Altair ESAComp™ ©1992-2021
Altair Feko™ ©1999-2014 Altair Development S.A. (Pty) Ltd.; ©2014-2021 Altair Engineering Inc.
Altair Flux™ ©1983-2021
Altair FluxMotor™ ©2017-2021
Altair HyperCrash™ ©2001-2020
Altair HyperGraph™ ©1995-2021
Altair HyperLife™ ©1990-2021
Altair HyperMesh™ ©1990-2021
Altair HyperStudy™ ©1999-2021
Altair HyperView™ ©1999-2021
Altair HyperWorks™ ©1990-2021
Altair HyperXtrude™ ©1999-2021
Altair Inspire™ ©2009-2021 including Altair Inspire Motion, Altair Inspire Structures, and Altair Inspire Print3D
Altair Inspire Cast ©2011-2021 (formerly Click2Cast)
Altair Inspire ElectroFlo ©1992-2021
Altair Inspire Extrude Metal ©1996-2021 (formerly Click2Extrude - Metal)
Altair Inspire Extrude Polymer ©1996-2021 (formerly Click2Extrude - Polymer)
Altair Inspire Form ©1998-2021 (formerly Click2Form)
Altair Inspire Friction Stir Welding ©1996-2021
Altair Inspire Mold ©2009-2021
Altair Inspire PolyFoam ©2009-2021
Altair Inspire Play ©2009-2021
Altair Inspire Render ©1993-2016 Solid Iris Technologies Software Development One PLLC, © 2016-2021 Altair Engineering Inc (formerly Thea Studio)
Altair Inspire Resin Transfer Molding ©1990-2021
Altair Inspire Studio ©1993-2021 (formerly ‘Evolve’)
Altair Manufacturing Solver™ © 2011-2021
Altair Material Data Center ©2019-2021
Altair MotionSolve™ ©2002-2021
Altair MotionView™ ©1993-2021
Altair Multiscale Designer™ ©2011-2021
Altair nanoFluidX™ ©2013-2018 Fluidyna GmbH, © 2018-2021 Altair Engineering Inc.
Altair newFASANT ©2010-2021
Altair OptiStruct™ ©1996-2021
Altair PollEx ©2003-2021
Altair Radioss™ ©1986-2021
Altair Seam™ © 1985-2019 Cambridge Collaborative, Inc., © 2019-2021 Altair Engineering Inc.
Altair SimLab™ ©2004-2021
Altair SimSolid™ ©2015-2021
Altair ultraFluidX™ ©2010-2018 Fluidyna GmbH, © 2018-2021 Altair Engineering Inc.
Altair Virtual Wind Tunnel™ ©2012-2021
Altair WinProp™ ©2000-2021
Altair WRAP ©1998-2020 WRAP International AB, © 2020-2021 Altair Engineering AB
Altair Packaged Solution Offerings (PSOs)
Altair Automated Reporting Director™ ©2008-2021
Altair GeoMechanics Director™ ©2011-2021
Altair Impact Simulation Director™ ©2010-2021
Altair Model Mesher Director™ ©2010-2021
Altair NVH Director™ ©2010-2021
Altair Squeak and Rattle Director™ ©2012-2021
Altair Virtual Gauge Director™ ©2012-2021
Altair Weight Analytics™ ©2013-2021
Altair Weld Certification Director™ ©2014-2021
Altair Multi-Disciplinary Optimization Director™ ©2012-2021
Altair Data Analytics Products
Altair Knowledge Studio® © 1994-2020 Angoss Software Corporation, © 2020-2021 Altair Engineering, Inc.
Altair Knowledge Studio for Apache Spark © 1994-2020 Angoss Software Corporation, © 2020-2021 Altair Engineering, Inc.
Altair Knowledge Seeker™ © 1994-2020 Angoss Software Corporation, © 2020-2021 Altair Engineering, Inc.
Altair Knowledge Hub™ © 2017-2020 Datawatch Corporation, © 2020-2021 Altair Engineering, Inc.
KnowledgeWorks™ © 2021 Altair Engineering, Inc.
Altair Monarch™ © 1996-2020 Datawatch Corporation, © 2020-2021 Altair Engineering, Inc.
Altair Monarch Server © 1996-2020 Datawatch Corporation, © 2020-2021 Altair Engineering, Inc.
Altair Panopticon™ © 2004-2020 Datawatch Corporation, © 2020-2021 Altair Engineering, Inc.
Altair SmartWorks™
Altair SmartCore™ © 2011-2021
Altair SmartEdge™ © 2011-2021
Altair SmartSight™ © 2011-2021
Altair One™ ©1994-2021
Altair intellectual property rights are protected under U.S. and international laws and treaties. Additionally, Altair software may be protected by patents or other intellectual property rights. All other marks are the property of their respective owners.
ALTAIR ENGINEERING INC. Proprietary and Confidential. Contains Trade Secret Information.
Not for use or disclosure outside of Altair and its licensed clients. Information contained in Altair software shall not be decompiled, disassembled, “unlocked”, reverse translated, reverse engineered, or publicly displayed or publicly performed in any manner. Usage of the software is only as explicitly permitted in the end user software license agreement. Copyright notice does not imply publication.
Third party software licenses
AcuConsole contains material licensed from Intelligent Light (www.ilight.com) and used by permission.
Software Security Measures:
Altair Engineering Inc. and its subsidiaries and affiliates reserve the right to embed software security mechanisms in the Software for the purpose of detecting the installation and/or use of illegal copies of the Software. The Software may collect and transmit non-proprietary data about those illegal copies. Data collected will not include any customer data created by or used in connection with the Software and will not be provided to any third party, except as may be required by law or legal process or to enforce our rights with respect to the use of any illegal copies of the Software. By using the Software, each user consents to such detection and collection of data, as well as its transmission and use if an illegal copy of the Software is detected. No steps may be taken to avoid or detect the purpose of any such security mechanisms.