プレートの作成
プレートを作成します。このプレートにUTD解法を適用します。
-
プレートを作成します。
-
長方形を作成します。
- ツリーのWorkplanesグループで、Global YZを右クリックしてSet as defaultを選択します。
- Definition method: Base corner, width, depth
- Base corner (C) = (-3, 0, 0)
- Width (W) = 6
- Depth (D) = 3
- Label: metal_plate.
-
長方形を作成します。
- Global XYをデフォルトのワークプレーンとして設定します。
-
metal_plateパートにUTD解法のプロパティを設定します。
Tip: Face propertiesダイアログを開いてSolutionタブをクリックします。Solve with special solution methodリストから、Uniform theory of diffraction (UTD)を選択します。