*setettypeelemtypereference()

Sets the element configuration corresponding to the ET type specified in the sensor カードイメージ.

Syntax

*setettypeelemtypereference (sensor_card_image_name, config)

Type

HyperMesh Template Command

Description

Sets the element configuration corresponding to the ET type specified in the sensor カードイメージ. This is applicable only for ANSYS.

Inputs

sensor_card_image_name: A 32-character string enclosed in double quotes that indicates the カードイメージ name of the sensor for which the element configuration applies.
config: The configuration number of the elements in the sensor カードイメージ.

Example

*setettypeelemtypereference("SHELL51",60)
*setettypeelemtypereference("CONTAC52",70)
*setettypeelemtypereference("PLANE53",106)
*setettypeelemtypereference("PLANE53",108)
*setettypeelemtypereference("SOLID46",208)

Version History

14.0