## Example

app = pf.GetApplication()
app:NewProject()
app:OpenFile(FEKO_HOME..[[/shared/Resources/Automation/Dipole_Example.fek]])

-- Create a Smith charts with a load trace

-- Configure the trace quantity

complexLoadTrace.Quantity.Phase = 50

## Usage locations (object properties)

The following objects have properties using the LoadSmithQuantity object:

## Property List

The load value to use. The value is a complex expression, e.g. “50+j*0”. (Read/Write Expression)
Phase
The phase to be added to the trace. The value is in degrees [-360,360]. (Read/Write number)
ReferenceImpedanceExpression
The reference impedance value to use. The value is a complex expression, e.g. “50+j*0”. (Read/Write Expression)
UseCustomReferenceImpedance
Specifies whether a custom reference impedance should be used. (Read/Write boolean)

## Property Details

The load value to use. The value is a complex expression, e.g. “50+j*0”.
Type
Expression
Access
Type
boolean
Access
Phase
The phase to be added to the trace. The value is in degrees [-360,360].
Type
number
Access
Enable phase addition for the trace.
Type
boolean
Access