Example 3
This example shows the dynamic monostatic RCS of two cubes.
Step 1
Create a new newFASANT project (using the MONCROS module) following the Step 1 to Step 3 in Example 1.
Step 2
Select Geometry → Parameters→ Define parameters and introduce the following parameters.
![](../../../../images/newfasant/moncros/training_examples/parameter.png)
Figure 1. Define parameters panel
Step 3
Select Geometry → Solid→ Box to define the box parameters as follows:
![](../../../../images/newfasant/moncros/training_examples/command.png)
Figure 2. Box parameters
Step 4
Repeat Step 3 to define another box.
![](../../../../images/newfasant/moncros/training_examples/box.png)
Figure 3. Box parameters
![](../../../../images/newfasant/moncros/training_examples/geommetry.png)
Figure 4. Geometry composed of two boxes
Step 5
In the Simulation panel select a frequency of 0.3 GHz (default options) and press Save.
![](../../../../images/newfasant/moncros/training_examples/simulation.png)
Figure 5. Simulation panel
Step 6
Select the Solver → Parameters option and choose CFIE solution
![](../../../../images/newfasant/moncros/training_examples/solver.png)
Figure 6. Solver panel
Step 7
Select the RCS → Parameters option. Select Monostatic RCS and leave the default parameters. Press the Save button.
![](../../../../images/newfasant/moncros/training_examples/rcs.png)
Step 8
Select Output → Observation directions. Leave the default observation directions (0.0 phi cut with theta angle varying between 0.0 and 180.0 using 181 samples).
![](../../../../images/newfasant/moncros/training_examples/output.png)
Figure 7. Observation directions panel
Step 9
Before running the simulation, select the Meshing → Create Mesh option. Set 10 divisions on planar and curved surfaces, set Processors to 2 and the default number of bands per octave. Press the Mesh button.
Step 10
Select Calculate → Execute and set the number of desired processors to run the simulation. Press the Execute button to start the calculation.
Step 11
Select Show Results → Far Field→ View Cuts to visualize the far field values for the first step.
![](../../../../images/newfasant/moncros/training_examples/resul.png)
Figure 8. Far Field results
Step 12
Add a new series selecting the step on the combo box and click on Add Series button.
![](../../../../images/newfasant/moncros/training_examples/resul2.png)
Figure 9. Far Field results
Step 13
Select Show Results → Far Field→ View Text Files to visualize the text file with the results of the simulation.
![](../../../../images/newfasant/moncros/training_examples/text.png)
Figure 10. Text file result