masses
Unless otherwise specified, data names are accessible in level 3 only.
- activesuppressed
- Returns non-zero if the entity is set inactive, 0 otherwise.
- attached_location_tolerance
- The attached location tolerance value.
- attachmentmode
- True if manual mode, false if automatic mode.
- attributesmax
- The number of attributes owned by this entity.
- c
- The global components of motion that have weighting factor WTi, at grid points Gi,j. Any of the digits 1, 2, ..., 6, with no embedded blanks. This is an attribute for Nastran.
- calculatenode
- True if the center of attachment nodes location is calculated, false if the mass location is selected as a node.
- CID
- The coordinate system identification number. Default = 0, must be ≥ -1. This is an attribute for Nastran.
- CIDOption
- True when CID is enabled, false otherwise. This is an attribute for Nastran.
- CM
- The components of motion at GMi in the redefined dependent degree-of-freedom set. Any of the digits 1 through 6, with no embedded blanks. This is an attribute for Nastran.
- color
- The 1-64 color of the entity.
- color_rgb
- The RGB color of the entity.
- concentric_offset_tolerance
- The concentric offset tolerance value.
- config
- The configuration of the entity.
- definedentity
- True if the entity is defined, false otherwise.
- distribution_type
- The distribution type:
- entityoption
- The entity selection option for NSM config.
- hole_distance_tolerance
- The hole distance tolerance value.
- I11
- The mass moment of inertia measured at the mass center of gravity. This is an attribute for Nastran.
- I21
- The mass moment of inertia measured at the mass center of gravity. This is an attribute for Nastran.
- I22
- The mass moment of inertia measured at the mass center of gravity. This is an attribute for Nastran. Type: double
- I31
- The mass moment of inertia measured at the mass center of gravity. This is an attribute for Nastran.
- I32
- The mass moment of inertia measured at the mass center of gravity. This is an attribute for Nastran.
- I33
- The mass moment of inertia measured at the mass center of gravity. This is an attribute for Nastran.
- id
- The ID of the entity.
- include
- The ID of the include file the entity is organized in.
- includeid
- The ID of the include file the entity is organized in.
- inertia
- True when the intertia values are defined, false otherwise.
- internalid
- The ID of the entity.
- magnitude
- The mass magnitude. Type: double
- massdisplaylocation
- The mass display location entity IDs (nodes, elements, components or properties).
- masslocation
- The mass location region IDs.
- moduleid
- The module ID of the entity.
- name
- The name of the entity.
- nsm_distribution_type
- The NSM distribution type.
- outputsuppressed
- Returns non-zero if the entity is set "do not export", 0 otherwise.
- percentage_area_remapping
- The percentage area remapping. Valid for massdisplaylocation of elements.
- planer_angle_tolerance
- The planer angle tolerance.
- poolid
- The pool number of the entity.
- poolname
- The pool name of the entity.
- propertyname
- The property name stored as ghost to remap property if reconnect_rule = 2.
- propertypoolid
- The property pool number stored as ghost to remap property if reconnect_rule = 1.
- propertysolverid
- The property ID stored as ghost to remap property if reconnect_rule = 1.
- propertytype
- The NSM property type.
- realization
- The realization entities.
- realization_zone
- The rigid mass realization zone.
- realizationtype
- The rigid mass realization type.
- realize_status
- The realization status.
- realizedfecomponent
- The realization FE component ID when realizedfecomponentoption is 2.
- realizedfecomponentoption
- The realization FE component option.
- reconnect_rule
- The reconnect rule for property and component.
- refc
- The global components of motion whose values are computed at the reference grid point. Any of the digits 1 through 6, with no embedded blanks. This is an attribute for Nastran.
- rigidmassdisplaylocation
- The rigid mass display location node ID.
- rigidmasslocation
- The rigid mass attachment location node ID.
- solver_id
- The solver ID of the entity.
- solverkeyword
- The name of the solver keyword.
- toleranceflag
- True if tolerance is set, false otherwise.
- totalmass
- The total mass value.
- WT
- The weighting factor for components of motion. This is an attribute for Nastran.
- X1
- The offset distance from the grid point to the center of gravity of the mass in the coordinate system defined by CID, unless CID = -1, in which case X1, X2, and X3 are the coordinates (not offsets) of the center of gravity of the mass in the basic coordinate system. Default = 0.0. This is an attribute for Nastran.
- X2
- The offset distance from the grid point to the center of gravity of the mass in the coordinate system defined by CID, unless CID = -1, in which case X1, X2, and X3 are the coordinates (not offsets) of the center of gravity of the mass in the basic coordinate system. Default = 0.0. This is an attribute for Nastran.
- X3
- The offset distance from the grid point to the center of gravity of the mass in the coordinate system defined by CID, unless CID = -1, in which case X1, X2, and X3 are the coordinates (not offsets) of the center of gravity of the mass in the basic coordinate system. Default = 0.0. This is an attribute for Nastran.
Version History
2020 - Added new data name color_rgb.
2020.1 - Added new data name solverkeyword.
2021.1 - Added new data names moduleid, poolid, poolname, and solver_id.
2021.2 - Added new data names internalname and solvername.