*nopickhandles()
Specifies that element and geometry pick handles are turned off by default.
Syntax
*nopickhandles()
Type
hm.cfg Commands
Description
Specifies that element and geometry pick handles are turned off by default. Pick handles will be turned off when HyperMesh is started and turned off whenever a new file is loaded, if this command is specified. This improves graphic performance; however, 0D elements, such as contact slave elements and mass elements, cannot be seen easily. The element and geometry pick handles can also be set in the graphics subpanel of the Options panel.
Example
To turn of pick handles by default:
*nopickhandles()