Modeling

The following NVH specific meshing tools are available:
  • Enhanced Acoustic Cavity Mesher
  • Coarse Display Mesher

Toolbars

The NVH application has the following toolbars:


Figure 1.
Opens the Mesh Coarsening tool.
Opens the Acoustic Cavity Mesh Panel.


Figure 2.
Opens the Connection Creation (Interactive Create) tool.
Opens the Connection Creation (Auto Create) tool.
Opens the Connection Mapping Tool.
Opens the Connection Realization tool.


Figure 3.
TagPoint Show Icon Only
TagPoint Show Icon and Name
TagPoint Show Icon and Description
TagPoint Show Icon and Name: Module
Display 1D PLOTELs Only
Display 1D and 2D PLOTELs
Display All
Show/Hide MPCs


Figure 4.
Opens the Network View block diagram.
Opens the Batch Model Check Run.
Opens the Batch Model Reduction.
Opens the Analysis Manager.
Opens the Solver Deck Comparison tool.
Opens the Job Manager.
Opens the NVH TPL Editing Tool.
Opens the Pack and Go.
Opens the File Path Replace utility.
Pops down the working window.


Figure 5.
Opens the Tagpoint Mapping Tool.
Opens the LCS Manager tool.
Opens the Response Point Manager.
Opens the Frequency Set Manager.
Opens the Control Volume Manager.
Opens the Panel Set Manager.
Opens the Tuning Set Manager.