SnRD Pre - Model Preparation

SnRD Pre-Processing module, provides a guided process for the creation of entities (elements, load collectors and so on) that are specific to SnR input deck creation. During the process, these entities are reflected in core HyperMesh model browser.

To launch SnRD, follow the below steps:
  1. Launch HyperMesh Desktop 2021.2 from installed location.
    HyperMesh Desktop 2021.2 user interface is displayed as shown below:

    Figure 1.
  2. Select File > Load > Preferences.
    Select Squeak & Rattle and click Load. This creates SnRD menu in the HyperMesh window.

    Figure 2.
  3. Select SnRD from Directors.

    Figure 3.
  4. All the pre processing tasks are loaded and displayed in the SNR-Pre tab.

    Figure 4.
    The next step in the process is to define the Process Parameters.