CreatePark_dq_From_abc.PFM

Description

Create dq parameter from abc component using Park transformation.

Note: For more details about this macro, consult this additional document

Input

  • Enter component a
  • Enter component b
  • Enter component c
  • Select the mobile mechanical set
  • Enter number of poles
  • Enter angle for which rotor is aligned with phase a
  • Enter name of the quantity

Output

  • Create 2 new I/O (FLUX_D and FLUX_Q) parameters
  • If name of the quantity is flux, then create TORQUE_PARK parameter (nb_pole/2*(FLUX_D*IQ-FLUX_Q*ID)*sqrt(2)