`CylindricalYRequestPoints`

The cylindrical (Y axis) request point positions.

Example

app = cf.GetApplication()
project = app:NewProject()

    -- Add a Cylindrical NearFiled starting at (0,0,0) extending along Y to a width of 1,
    -- an inner radius of 1 and an outer radius of 2.
    
nearField = project.SolutionConfigurations[1].NearFields:AddCylindricalY(1,0,0,
                                                                      2,360,1,
                                                                      3,21,11)

cylindricalYRequestPoints = nearField.CylindricalYRequestPoints

    -- Get the Phi coordinate of the start of the NearField, which is 0 degrees

startPhi = cylindricalYRequestPoints.Start.Phi

    -- Get the Phi coordinate of the end of the NearField, which is 360 degrees

endPhi = cylindricalYRequestPoints.End.Phi

Usage locations (object properties)

The following objects have properties using the CylindricalYRequestPoints object:

NearField(.CylindricalYRequestPoints)

Property List

End: The end point. (Read only CylindricalYPoint)
Increment: The increment per axis. Only valid if PointSpecificationMethod is Increment. (Read only CylindricalYPoint)
NumberOfPoints: The number of points per axis. Only valid if PointSpecificationMethod is NumberOfPoints. (Read only CylindricalYPoint)
Start: The start point. (Read only CylindricalYPoint)

Property Details

End

The end point.

Type: CylindricalYPoint
Access: Read only

Increment

The increment per axis. Only valid if PointSpecificationMethod is Increment.

Type: CylindricalYPoint
Access: Read only

NumberOfPoints

The number of points per axis. Only valid if PointSpecificationMethod is NumberOfPoints.

Type: CylindricalYPoint
Access: Read only

Start

The start point.

Type: CylindricalYPoint
Access: Read only