Apply a uniformly distributed translational inertia load over the volumes of the
parts in an assembly.
-
In the Project Tree, open
the Analysis Workbench.
-
In the workbench toolbar, click .
-
Specify where the translational inertia will be applied in one of the following
ways:
- Activate the Apply to whole assembly radio button
to apply to all parts in the assembly.
- Activate the Apply to selected parts radio
button, then select desired parts in the modeling window.
-
Specify the Acceleration along the X, Y, and Z axes.
-
Specify the Units for the acceleration.
-
Click OK.
The vector representing the inertia load will appear in the
model.