Why Is the Extrusion Wizard Not Assigning Symmetry Boundary Conditions Properly?
- Center of the billet should be at (x=0,y=-) = that is on the Z=axis. However, the Z position of the Billet_DummBlock face can be anything.
- Extrusion axis should be Z-axis
- Since tolerance plays a role in this computation, make sure the center is at 0,0. Even if the center is at something like 0.001, it may be large value for a model in meters.
- In order to achieve this, create a node at (0,0) and then create a node at billet center and translate it the model using N2-n1 option.
If this does not fix the problem, please send your model to hxsupport@altair.com