Altair Inspire Form 2020
Inspire Form 2020 includes the following new features and enhancements:
New Features: General
- User Interface Enhancements
- The Inspire Form user interface has been updated for 2020 and features several new themes, as well as changes to selection and pre-highlighting colors. If you prefer the old background theme, just select Blue Twilight in the Preferences under Workspace > Theme.
- Scale Factor
- The displacement/deformation can be scaled by a value defined by the user.
- Legend
- The slider to mask the contour can now be reversed using the Flip Mask option in the hamburger menu. Additionally, the slider can be set to a user-defined value with a single click. The slider snaps to legend call values while sliding.
New Features: Tryout
- Reference System
- Define a stationary system while viewing results and review the animation and displacement relative to this reference system. The refence system can be used to remove any rigid body rotation and translation from the displacement results. It is of significant help for viewing springback displacement as the reference system definition acts as a fixture point and eliminates rigid body rotation and translation.
- Manual Remote
- Manual remote has been added to the run options. A manual run creates necessary files for the analysis in the run history location. The user manually copies the files to the machine/server of choice for performing the run. Once the run is complete, the user manually copies the files back to the run history location to visualize the results.
- Callouts
- The callouts can now be defined on the tool to list its name and its attributes. Also, callouts can now be created on local maximum with box selection.
- Tracers
- Tracing has been improved so that it only traces on displayed blanks.
Enhancements: Tryout
- Property Editor
- A comment section has been added allowing for user comments on the blank and tools.
- Operations
- Operation names can be edited with the right-click context menu. The shortened name is displayed. Also, the operation position in the sequence can be quickly modified by drag and drop thereby allowing the user to insert a new operation and modify the sequence as needed.
- Guide Pins
- The user can now create multiple guide pins while remaining in the creation context. The user can also create guide pins attached to tools of STL/FE mesh representation.
- Start Operation
- Start Operation has been added to Tryout runs to enable starting a run from any operation, provided the opened session has results for the operation directly preceding the selected operation for the run. Runs with a start operation other than the first operation will also have results from the first operation based on the results available at the start of the run.
- Animation Frames
- Frames for animation and results visualization can now be defined by the user in the Advanced options of the Run dialog. The interval between animation frames is defined as the amount of tool travel.
- Materials
- Material type is extended beyond steel and aluminum to user-defined types for better organization. Young's modulus can be defined as varying with plastic strain using an exponential function or with a table. Cyclic hardening of the sheet metal is now supported by the well-known Kinematic hardening law, Mixed hardening law, and Yoshida hardening law.
- Part Orientation
- Custom Draw-Top, Draw-Front, and Draw-Right views are created for each operation based on the defined draw direction for ease of model setup and results visualization.
- File Import
- Multiple CAD file imports into Inspire Form are now supported.
Enhancements: Feasibility
- Constraints
- Constraint definition on edges allows the user to toggle between a fixed constraint or a sliding constraint. A fixed constraint fixes movement along and normal to the edge in the draw direction plane. A sliding constraint allows movement along the edge and fixes only movement normal to the edge in draw direction plane.
- Blank Nesting
- Process material utilization was added to the nesting report to account for additional blank material needed to support the stamping process beyond the part as utilized material and not a scrap.
- Part Orientation
- Custom Draw-Top, Draw-Front, and Draw-Right views are created based on the defined draw direction for ease of model setup and results visualization.