Loading [Contrib]/a11y/accessibility-menu.js

Links

Links connect the assembly of blocks in a diagram.

Each link connects to a block via a start or end port on the block:

The following figure shows a diagram with two blocks connected with a regular link:

Adding and Removing Links

  • To add a link, locate two blocks that you want to connect. Click a port on the first block, then click a port on a second block.
    A link appears. If the ports are not aligned, an orthogonal link appears with a knee in the middle:

    Note: The copy/paste operation is not applicable for adding links.
  • To remove a link, select a link and press Ctrl + X, or right-click, and select Delete.

Adding Points to Links

You can add points to an existing link from which you can attach other links.

Place your cursor on a link, then left-click twice. An intermediate point appears on the link:

Selecting and Displaying Links

  1. Hover over a link or link segment that you want to select.
    Hovering over a link highlights or pre-selects the link which is useful when you are trying to locate a specific point or segment of a link.
  2. Click to select the link. The software displays the status of the link as follows:

Link Display
The Project Browser includes a filter to show or hide different object types. If the filter is turned on to display links, then every selected link in the block diagram is also selected in the Project Browser. The following figure shows you a model of a bouncing ball diagram with Link 130 selected:

The Property Editor displays the name, id, source, and destination for a selected link.

Search in Models

Moving Link Points and Segments

You can move links and points as required for your model.

  • To move a point on a link, select any point other than the start and end point, as these are confounded with the ports. Move the point as required.
  • To move link segments, select one or more link segments and move as required. By default, the orthogonal alignment of the links is preserved.

Splitting Links

Split an existing link between two blocks to create a new connection in a diagram.

  1. Select an existing link segment where you want to connect a block:


  2. Press and hold Alt, then left-click and drag your mouse to the port of the block that you want to connect.


    A new link extends from the existing link to the new block.

Link Display

Links are color-coded by type: regular, explicit, implicit or bus.

Link types are displayed with the following default colors:
Black
Regular, explicit links.
Red
Event-handling links.
Blue
Implicit links, for example links to connect implicit blocks such as Modelica-like blocks used for acausal modeling.
Green
Bus links.