result tensor load

<name>=<value>

The name=value data name and/or attribute pairs that define the relevant data for the plot. For attributes, this can be either the attribute name or ID.

averageatnode=<true/false>

The averaging method HyperView used to average the results.

cornerdata=<true/false>

Enables HyperView to use corner tensors.

displayed=<true/false>

true - Activate this option to load results only on the displayed entities.

format=<principal/component>

The tensor plot format type: principal or component.

layer=<layer>

If a layer definition is available for an element, you can create a tensor plot for a specified element layer by selecting Lower, Mid, or Upper. The settings will be applied to all layers defined in the model.

layerfilter=<layerfilter id/layerfilter label?>

Enter an ID value or a label to reduce the layer list available for aggregation for the data types which have layers.

marked = <true/false>

Enable/disabled marked elements.

p1major/p2mid/p3minor=<true/false>

xx/yy/zz/xy/yz/zx=<true/false>

Edit any principal or component of a tensor.

For Principal, enter true or false for p1(major), p2(mid), or p3(minor).

For Component, enter true or false for the xx, yy, zz, xy, yz, or zx coordinates.

projectionrule=<none/xy/xz/yx/yz/zx/zy>

For shell (or planar) elements, results in any 3D coordinate system can be projected onto the element plane. Enter none to not use the projection rule.

showmidnoderesults=<true/false>

Calculate and show the tensors at the mid-side nodes if it is not available in the results file.

sset = <sset name>

Enter a selection set name.

system=<analysis/global/elemental/system name>

Enter the coordinate system type that will be used to calculate the results.

type =<typel>

The result type.

result tensor load type="Stress"