Setting the Simulation Frequency

Specify the frequency range of interest. For this example continuous frequency sampling is used where Feko automatically determines the frequency sampling for optimal interpolation.

  1. On the Source/Load tab, in the Settings group, click the  Frequency icon.
  2. On the Solution frequency dialog, select Continuous (interpolated) range from the drop-down list.

Specify the frequency range between 2.6 GHz and 3 GHz.

  1. Enter the start frequency and end frequency.
    • Start frequency (Hz): freq_min
    • End frequency (Hz): freq_max

  2. Click OK to specify the frequency and to close the dialog.