Angular Profile

Angular profiles at the base station as well as at the mobile station can be analyzed for each computed pixel within the simulation area.

Click Analysis > Angular Profile (BTS) or Analysis > Angular Profile (MS) to specify an evaluation location for the angular profile by positioning the mouse cursor in the result window. During mouse movement the graph window is updated automatically. After clicking, the angular profile for the current location is fixed.

Note: Angular profiles can be analyzed only if the simulation was calculated with a ray-optical propagation model and the additional ray data output was enabled. While loading the result file, you will be asked to load additionally available data. This question has to be answered with yes to do analysis of the radio channel.

Figure 1. Example of an angular profile at the base station for a specified location.