Plot the dynamics or incremental response at a selected point/face.
-
In the Project Tree, open
the Analysis Workbench.
-
On the workbench toolbar, click the
(Pick info) icon.
-
In the dialog, choose a Response type from the drop-down menu.
-
Activate the radio button for Pick point,
Pick face, or Choose datum point
set.
Note: The Datum point set will only be available if Datum points are present in
the model. If this is the case, you can select a point set from the
drop-down menu.
-
In the modeling window, select points/faces on the
model.
- Optional:
You can view multiple XY graphs at once by selecting the Show each
plot in a separate window check box.
- Optional:
Select the Hide labels check box to hide the display of
points' label and ID in the graphics.
The results will be plotted in the XY graph in the dialog. You can use
the scroll wheel to zoom in, the left mouse button to pan, or the
Refit button to reset the graph.
Note: The selection
by face option provides an average of the result value over the selected
face.