Model Checker Plots

The model checker plots module highlights and captures the failed checks of the report type plot from the model checker tool.

  1. Right-click at the report or chapter level and select Report/Chapter > Add > Modules > Model Checker Plot.
  2. Enter the name for the model checker plot module.
    Once executed, various plot outputs for the model checker plot are generated.
    • Component with solids and shells
    • Orientation vector along axis vector
    • RBE3 elements are collinear
    • Duplicate 1D/2D/3D elements
    • Free nodes in the model
    • Coinciding G1 and G2 grid points


      Figure 1. Duplicate 1D Elements