Introduction

Altair Embed® SE, commonly referred to as Embed SE, is a complete environment for model-based development and dynamic simulation of complex systems. It combines an intuitive graphical interface with a powerful mathematical engine to accurately represent linear and nonlinear dynamic systems, and simulate their behavior in continuous time, sampled time, or a combination of both.

In addition, Embed SE’s tightly integrated development environment makes it easy to pass freely among the stages of model construction, simulation, optimization, and validation, letting you create, verify, and validate prototypes before committing to the design.

There are several different versions of the Embed software. Click here to see what’s in each version.

Intellectual property rights notice

Intellectual Property Rights Notice: 

Copyrights, Trademarks, Trade Secrets, Patents & Third-Party Software Licenses           

 

Altair Engineering Inc. Copyright © 1986-2021.  All Rights Reserved.

Copyrights in the below are held by Altair Engineering, Inc., except where otherwise explicitly stated.  This Intellectual Property Rights Notice is exemplary, not exhaustive.     

 

Special Notice: Pre-release versions of Altair software are provided ‘as is’, without warranty of any kind. Usage of pre-release versions is strictly limited to non-production purposes.

 

Altair HyperWorks™ - The Platform for Innovation™

Altair AcuConsole™ ©2006-2021

Altair AcuSolve™ ©1997-2021

Altair Activate® ©1989-2021 (formerly solidThinking Activate)

Altair Compose® ©2007-2021 (formerly solidThinking Compose)

Altair ConnectMe™ ©2014-2021

Altair EDEM © 2005-2021 DEM Solutions Ltd, © 2019-2021 Altair Engineering, Inc.

Altair ElectroFlo™ ©1992-2021

Altair Embed® ©1989-2021 (formerly solidThinking Embed)

Altair Embed® SE ©1989-2021 (formerly solidThinking Embed SE)

Altair Embed® Basic ©2018-2021

Altair Embed®/Digital Power Designer ©2012-2021

Altair Embed® Viewer ©1996-2021

Altair ESAComp™ ©1992-2021

Altair Feko™ ©1999-2014 Altair Development S.A. (Pty) Ltd., ©2014-2021 Altair Engineering Inc.

Altair Flux™ ©1983-2021

Altair FluxMotor™ ©2017-2021

Altair HyperCrash™ ©2001-2021

Altair HyperGraph™ ©1995-2021

Altair HyperLife™ ©1990-2021

Altair HyperMesh™ ©1990-2021

Altair HyperStudy™ ©1999-2021

Altair HyperView™ ©1999-2021

Altair HyperXtrude™ ©1999-2021

Altair Inspire™ ©2009-2021 including Altair Inspire Motion, Altair Inspire Structures, and Altair Inspire Print3D

Altair Inspire Cast ©2011-2021 (formerly Click2Cast)

Altair Inspire ElectroFlo ©1992-2021

Altair Inspire Extrude Metal ©1996-2021 (formerly Click2Extrude - Metal)

Altair Inspire Extrude Polymer ©1996-2021 (formerly Click2Extrude - Polymer)

Altair Inspire Form ©1998-2021 (formerly Click2Form)

Altair Inspire Friction Stir Welding ©1996-2021

Altair Inspire Mold ©2009-2021

Altair Inspire PolyFoam ©2009-2021

Altair Inspire Play ©2009-2021

Altair Inspire Render ©1993-2016 Solid Iris Technologies Software Development One PLLC, © 2016-2021 Altair Engineering Inc (formerly Thea Studio)

Altair Inspire Resin Transfer Molding ©1990-2021

Altair Inspire Studio ©1993-2021 (formerly ‘Evolve’)

Altair Manufacturing Solver™ © 2011-2021

Altair Material Data Center ©2019-2021

Altair MotionSolve™ ©2002-2021

Altair MotionView™ ©1993-2021

Altair Multiscale Designer™ ©2011-2021

Altair nanoFluidX™ ©2013-2018 Fluidyna GmbH, © 2018-2021 Altair Engineering Inc.

Altair newFASANT ©2010-2021

Altair OptiStruct™ ©1996-2021

Altair PollEx ©2003-2021

Altair Radioss™ ©1986-2021

Altair Seam™ © 1985-2019 Cambridge Collaborative, Inc., © 2019-2021 Altair Engineering Inc.

Altair SimLab™ ©2004-2021

Altair SimSolid™ ©2015-2021

Altair ultraFluidX™ ©2010-2018 Fluidyna GmbH, © 2018-2021 Altair Engineering Inc.

Altair Virtual Wind Tunnel™ ©2012-2021

Altair WinProp™ ©2000-2021

Altair WRAP ©1998-2021 WRAP International AB, © 2021 Altair Engineering AB

 

Altair Packaged Solution Offerings (PSOs)

Altair Automated Reporting Director™ ©2008-2021

Altair GeoMechanics Director™ ©2011-2021

Altair Impact Simulation Director™ ©2010-2021

Altair Model Mesher Director™ ©2010-2021

Altair NVH Director™ ©2010-2021

Altair Squeak and Rattle Director™ ©2012-2021

Altair Virtual Gauge Director™ ©2012-2021

Altair Weight Analytics™ ©2013-2021

Altair Weld Certification Director™ ©2014-2021

Altair Multi-Disciplinary Optimization Director™ ©2012-2021

 

Altair PBS Works™ - Accelerating Innovation in the Cloud™

Altair PBS Professional® ©1994-2021

Altair Control™ ©2008-2021; (formerly PBS Control)                          

Altair Access™ ©2008-2021; (formerly PBS Access)

Altair Accelerator™ ©1995-2021; (formerly NetworkComputer)

Altair Accelerator™ Plus ©1995-2021; (formerly WorkloadXelerator)

Altair FlowTracer™ ©1995-2021; (formerly FlowTracer)

Altair Allocator™ ©1995-2021; (formerly LicenseAllocator)

Altair Monitor™ ©1995-2021; (formerly LicenseMonitor)

Altair Hero™ ©1995-2021; (formerly HERO)

Altair Software Asset Optimization (SAO) ©2007-2021

 

Note:

Compute Manager™ ©2012-2017 is now part of Altair Access

Display Manager™ ©2013-2017 is now part of Altair Access

PBS Application Services™ ©2008-2017 is now part of Altair Access

PBS Analytics™ ©2008-2017 is now part of Altair Control

PBS Desktop™ ©2008-2012 is now part of Altair Access, specifically Altair Access desktop, which also has Altair Access web and Altair Access mobile

e-Compute™ ©2000-2010 was replaced by “Compute Manager” which is now Altair Access

 

Altair KnowledgeWorks™

Altair Knowledge Studio® © 1994-2021 Angoss Software Corporation, © 2021 Altair Engineering, Inc.

Altair Knowledge Studio for Apache Spark © 1994-2021 Angoss Software Corporation, © 2021 Altair Engineering, Inc.

Altair Knowledge Seeker © 1994-2021 Angoss Software Corporation, © 2021 Altair Engineering, Inc.

Altair Knowledge Hub © 2017-2021 Datawatch Corporation, © 2021 Altair Engineering, Inc.

Altair Monarch © 1996-2021 Datawatch Corporation, © 2021 Altair Engineering, Inc.

Altair Monarch Server © 1996-2021 Datawatch Corporation, © 2021 Altair Engineering, Inc.

Altair Panopticon © 2004-2021 Datawatch Corporation, © 2021 Altair Engineering, Inc.

 

Altair SmartWorks™

Altair SmartCore © 2011-2021

Altair SmartEdge © 2011-2021

Altair SmartSight © 2011-2021

 

Altair One™ ©1994-2021

 

Altair intellectual property rights are protected under U.S. and international laws and treaties. Additionally, Altair software may be protected by patents or other intellectual property rights. All other marks are the property of their respective owners.

 

ALTAIR ENGINEERING INC.  Proprietary and Confidential.  Contains Trade Secret Information.

Not for use or disclosure outside of Altair and its licensed clients. Information contained in Altair software shall not be decompiled, disassembled, “unlocked”, reverse translated, reverse engineered, or publicly displayed or publicly performed in any manner. Usage of the software is only as explicitly permitted in the end user software license agreement. Copyright notice does not imply publication.

 

Third-party software licenses

 

AcuConsole contains material licensed from Intelligent Light (www.ilight.com) and used by permission.

 

Software Security Measures:

 

Altair Engineering Inc. and its subsidiaries and affiliates reserve the right to embed software security mechanisms in the Software for the purpose of detecting the installation and/or use of illegal copies of the Software.  The Software may collect and transmit non-proprietary data about those illegal copies.  Data collected will not include any customer data created by or used in connection with the Software and will not be provided to any third party, except as may be required by law or legal process or to enforce our rights with respect to the use of any illegal copies of the Software.  By using the Software, each user consents to such detection and collection of data, as well as its transmission and use if an illegal copy of the Software is detected.  No steps may be taken to avoid or detect the purpose of any such security mechanisms.

Nowide License

Copyright (c) 2012 Artyom Beilis (Tonkikh)

Distributed under the Boost Software License, Version 1.0. (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt

Boost Software License - Version 1.0 - August 17th, 2003

Permission is hereby granted, free of charge, to any person or organization obtaining a copy of the software and accompanying documentation covered by this license (the "Software") to use, reproduce, display, distribute, execute, and transmit the Software, and to prepare derivative works of the Software, and to permit third-parties to whom the Software is furnished to do so, all subject to the following:

The copyright notices in the Software and this entire statement, including the above license grant, this restriction and the following disclaimer,must be included in all copies of the Software, in whole or in part, and all derivative works of the Software, unless such copies or derivativeworks are solely in the form of machine-executable object code generated by a source language processor.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS ORIMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT. IN NO EVENTSHALL THE COPYRIGHT HOLDERS OR ANYONE DISTRIBUTING THE SOFTWARE BE LIABLEFOR ANY DAMAGES OR OTHER LIABILITY, WHETHER IN CONTRACT, TORT OR OTHERWISE,ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHERDEALINGS IN THE SOFTWARE.

OpenXLSX License

Copyright (c) 2020, Kenneth Troldal Balslev

All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

* Redistributions of source code must retain the above copyright notice, this   list of conditions and the following disclaimer.

* Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

* Neither the name of the copyright holder nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Pugixml LIcense

pugixml parser - version 1.10

* Copyright (C) 2006-2019, by Arseny Kapoulkine (arseny.kapoulkine@gmail.com)

* Report bugs and download new versions at https://pugixml.org/

This library is distributed under the MIT License. See notice at the end of this file.

This work is based on the pugxml parser, which is:

Copyright (C) 2003, by Kristen Wegner (kristen@tima.net)

Copyright (c) 2006-2019 Arseny Kapoulkine

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, HETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR THER DEALINGS IN THE SOFTWARE.

MIT License

Copyright (c) Microsoft Corporation

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

 The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

 

librdkafka - Apache Kafka C driver library

Copyright (c) 2012-2020, Magnus Edenhill

All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation  and/or other materials provided with the distribution.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.