SignalScoping

This block defines the Scope of the signal defined by the SetSignal block with the corresponding signal name, when the SetSignal block is configured as Scoped.

    SignalScoping

Library

Routing

Description

The SignalScoping block specifies the scope of the signal defined by the SetSignal block with the corresponding signal name. The SetSignal block must be in the same diagram at the same or lower level provided its "Signal Scope" parameter is set to "Scoped". Within this scope the signal can be retreived using the GetSignal block.
This block is not used for local and global signals.
The signal name can be specified by any valid OML string.

Parameters

SignalScoping_0

NameLabelDescriptionData TypeValid Values

tag

Signal name

Specify the name of the input signal.

String