Importing and Exporting

When selecting a geometry, the following menu appears:



Figure 1. File Menu
The supported formats to be imported and exported by newFASANT are:
  • NURBS file format (.nur extension), used only in the newFASANT software.
  • IGES (Initial Graphics Exchange Specification, .igs extension) file format, widely used format for exchange of information among CAD software.
  • STEP file format.
  • DXF (Drawing Exchange Format) file format.
  • MSH (Mesh) file format.
  • STL (STereo Lithography) file format.
  • NAS (NASA STRuctureANalysis extension) file format.
  • Points file, in .txt format. List or points (every point in a different line) given by their X, Y, and Z in the same line.