Introduction of background knowledge regarding flow physics and CFD as well as detailed information about the use of AcuSolve and what specific options do.
This section gives a brief description of a general workflow of a typical CFD process. It describes in short the problem
description, pre-processing, solving and post-processing aspects of a CFD workflow.
This section details the several sub-categories of pre-processing in AcuSolve, including the use of user interface, solver parameters, model parameters and mesh generation.
This section details the post-processing tools of AcuSolve, namely AcuProbe, which gives graphical representation of parameters and AcuFieldView, which gives the detailed description of simulations, such as plots and animations.
AcuConsole has a great feature of defining all of the variables in a single panel and then using them in the model setup. This feature
is useful while performing studies such as grid refinement and time step sensitivity.
You can customize the layout by setting certain default settings in AcuConsole. In the Preference dialog you can change certain settings such as fonts and icon sizes, display of units, setting default surface output, default
mesh file type and the color scheme.
Collection of AcuSolve simulation cases for which results are compared against analytical or experimental results to demonstrate the accuracy
of AcuSolve results.
Introduction of background knowledge regarding flow physics and CFD as well as detailed information about the use of AcuSolve and what specific options do.
This section details the various tools and utilities available in AcuSolve that make the solver user-friendly.
Tools
Aside from providing robust solver for CFD simulations, AcuSolve also provides easy to use tools for smooth work flow.
Variable Manager AcuConsole has a great feature of defining all of the variables in a single panel and then using them in the model setup. This feature is useful while performing studies such as grid refinement and time step sensitivity.
Workspace Layout Preferences
You can customize the layout by setting certain default settings in AcuConsole. In the Preference dialog you can change certain settings such as fonts and icon sizes, display of units, setting default surface output, default mesh file type and the color scheme.