Perform Parametric Trimming

Use the Split: Parametric tool to restore suppressed fixed points.

  1. From the Geometry ribbon, click the Split > Parametric tool.

    Figure 1.
  2. Press and hold Ctrl and left-click on a surface edge to display a preview.

    Figure 2.
  3. Accept the preview to restore the fixed points.

    Figure 3.
  4. Click Split on the guide bar.
    If a surface edge has fixed points that are suppressed, you can hold the Control key and select the surface edge. This will show a preview of the suppressed fixed points.
Tip: Use snap points to create fixed points at predefined points on your model such as end, middle, and center points.